Sandisk Etreme 64gb & Asus F1A75-m Pro compatibilty

Hi to all!

My Sandisk Extreme 64Gb when plugged into USB ports controlled by chipset don’t work !!!

they work like USB2.0.

This is my hardware configuration:

Asus F1A75-M Pro

AMD A8-3870K

Crucial M4 64gb

2 x Corsair Vengeance 8GB DDR3 CMZ8GX3M2A1866C9

Case Silverstone TJ08-ESilverstone

EC01-P expansion card USB 3.0 http://

Silverstone FP37 card readers + USB 3.0 port  http://

Bios version 2206 (latest version)

Please, note: each time the installation is not successful, I reinstalled everything again I do this :

  • unplug expansion cards

  • unplug any device from usb ports, 2.0 & 3.0 

  • configure bios, I tried different configurations: ASmedia controller enabled or disabled, legacy support for USB2.0 & 3.0 enabled or disabled.

  • format

  • install windows

  • install chipset driver: AMD_Chipset_V512013 found on the motherboard support page, and after I try this one 13-4_vista_win7_win8_32-64_sb found on AMD support site.

  • but don’t work …

when I plug the pendrive, windows say “… this device can perform faster if you connect it to a … 3.0 port …”

System Properties>Hardware>Device Manager are ok I do not know what I can do … :frowning:

I apologize for my wronged English Thank you very much

There are incompatibilities within the USB3.0 standards. They are not as firm/consistant as they should be.  Maybe a driver update for one or more of your devices will help.  Or maybe a different drive is needed.

Driver and bios are updated.

I bought two devices, certificated by manufaters usb3.0 compatible, priced about 90€ each one …

ùand now I can’t use them ??

You knoe similar cases??

Yaou can give me any documentation???

Thank you very much

“You knoe similar cases??”


“Yaou can give me any documentation???”