The WD Elements sometimes is not detected in the PC

WD External and Portable SSD Portable SSD
1

HDD WD Elements SE 750GB NTFS USB 3.0 (WDBPCK7500ABK-EESN), PС Windows 7x32, WD TV Live SMP.

When connecting to the PC disk drive lamp flashes rapidly. The disc can be heard the quiet beeps.
The disk is not detected in the PC. I disconnect the drive from the PC.

Is connected to the WD TV Live - the disc properly defined.
Eject a disc from the WD TV Live and then re-connect to your PC. It is well defined.

Six months after buying the drive worked fine,
but last month it happens a second time.

Media Library in the WD TV Live is always off.
I’ve always deleted from the disk folder wd_tv.

The WD TV Live SMP has a bad controller rear USB port.
Can this be the reason?
http://community.wdc.com/t5/WD-TV-Live-Streaming-Discussions/Intention-to-finalize-a-rear-USB-port-issue-drives-USB-3-0/td-p/392589

CrystalDiskInfo 4.2.0 (C) 2008-2012 hiyohiyo
                                Crystal Dew World : http://crystalmark.info/

    OS : Windows 7 Ultimate Edition SP1 [6.1 Build 7601] (x86)
  Date : 2012/08/06 18:44:42

 WDC WD7500KMVW-11ZSMS5

       Enclosure : WD Elements 1042 USB Device (V=1058, P=1042, sa1)
           Model : WDC WD7500KMVW-11ZSMS5
        Firmware : 01.01A01
   Serial Number : WD-WXC1A7******
       Disk Size : 750.1 GB (8.4/137.4/750.1)
     Buffer Size : 8192 KB
     Queue Depth : 32
    # of Sectors : 1465149168
   Rotation Rate : 5200 RPM
       Interface : USB (Serial ATA)
   Major Version : ATA8-ACS
   Minor Version : ----
   Transfer Mode : SATA/300
  Power On Hours : 746 hours
  Power On Count : 367 count
     Temparature : 27 C (80 F)
   Health Status : Good
        Features : S.M.A.R.T., APM, 48bit LBA, NCQ
       APM Level : 0080h [ON]
       AAM Level : ----

– S.M.A.R.T. --------------------------------------------------------------
ID Cur Wor Thr RawValues(6) Attribute Name
01 200 200 _51 000000000000 Read Error Rate
03 157 147 _21 0000000013F4 Spin-Up Time
04 100 100 __0 00000000028B Start/Stop Count
05 200 200 140 000000000000 Reallocated Sectors Count
07 100 253 __0 000000000000 Seek Error Rate
09 _99 _99 __0 0000000002EA Power-On Hours
0A 100 100 __0 000000000000 Spin Retry Count
0B 100 100 __0 000000000000 Recalibration Retries
0C 100 100 __0 00000000016F Power Cycle Count
C0 200 200 __0 00000000006F Power-off Retract Count
C1 199 199 __0 000000000DE7 Load/Unload Cycle Count
C2 123 109 __0 00000000001B Temperature
C4 200 200 __0 000000000000 Reallocation Event Count
C5 200 200 __0 000000000000 Current Pending Sector Count
C6 100 253 __0 000000000000 Uncorrectable Sector Count
C7 200 200 __0 000000000000 UltraDMA CRC Error Count
C8 100 253 __0 000000000000 Write Error Rate

2

It seems to me your drive is faulty, but if you can connect your drive to another computer just to make sure if the drive is faulty .

3

Disc 9 of 10 just fine connected to my PC. I tried several times to connect to another PC - Just such a situation.

I do not understand the other. When the disc does not want to connect to a PC.

I then mount it to the WD TV Live and it is perfectly defined.

I removed it from the WD TV Live and connect to a PC - it is normal is defined.

4

I have a new WD elements I TB external hard disc(usb 3).It was being detected by my windows xp for two weeks but now fail to detect.It is being displayed in usb ports.It works well with another laptop.The LED continuously flashes and symptoms are similar to the one discussed above.Can the driver be reinstalled.Please guide.

5

I reinstalled the OS on my PC. Hope this helps.

6

Reinstall OS solved the issue.