First of all - Thank you sandisk for a great update.
I hope this wasn’t brought up before, it’s hard to keep track of this whole thread, but in ‘folder nav’ mode, you can’t add folders/tracks to the go list… seems wrong to me
(and I’m still waiting for the auto golist refresh thing! only then I’ll be able to say there’s no need for rockbox.)
Thanks for update! It seems to have solved my two major issues with the player: resuming large mp3 files sometimes fails, and an inability to play very large files. I listen to a lot of audiobooks and like to manage them as one (very) large mp3 file.
I just tried a 1GB audio book - 45 hours long. I seeked out to 41 hours and change and made the player resume a few dozen times. Worked perfectly!
If you however want to use the ‘large database’ (8000 entries) you are going to have to format the device (after making a backup of its contents).
I am not shure if I understood entry #73 of this thread the same way as you did. And which one of us is right
As I understand MTP there is a database behind this protocol which stores the multimedia content in a large (database) file on the Fuze. This database is changed to make 8000 songs storable. The older versions where only able to store 4000 songs and the new firmware is compatible to this database. But if you do not switch to the newer database format you’re stuck with the maximum of 4000 songs. If you want to use the maximum of 8000 songs you have to reinitialise the Fuze to make it using the newer database format.
But (!) if anyone uses MSC this should be no point. The Fuze should be able to play up to 8000 songs without any reformatting because it rewrites the database for this mode any time you change the songlist - and this database only stores a list of songs stored in the file system of the Fuze and where they start on the medium. This database is a completley other database than the MTP database.
Time to get one of those rare 32GB microSD cards now so that I can more or less move my whole media collection over…
Don’t dig out that credit card just yet. 32GB micro-SDHC cards are not available. 16GB is the largest.
Officially not, but there are samples out by the manufacturers for the deleopers already. So if you now some guys in the business you can well get one by now (just don’t believe in the 32GB card on ebay…)
Thank you Sansa. The deciding factor in me getting this player was the fact that you support them so well and actually listen to your customers.
I would also like to add how wonderfully simple this update was to install. I normally HATE those little bubbles that popup by the clock in MS Windows… but when I plugged in my Fuze today and saw a little bubble popup and say “There’s a new update for your Fuze! Click here!” I was very excited! hahaha 2 Clicks and it was updated. Nice!
Thanks particularly for TRACK INFO.
Message Edited by Peregrine on 04-09-2009 09:51 AM
I just want to let you know that the screen turns itself off automatically at a period of time. It won’t affect screenlife, and will help you avoid burn-in.
The firmware update and support for 8000 tracks is much appreciated. I’ll install it tonight when I get home. Should I reformat then install the udpate, update then reformat, or doesn’t it matter?
Update, start your Fuze, then select Format on the device. This should do the trick.
Bob :smileyvery-happy:
That’s the only way to get the 8000 track availability? I was under the impression, perhaps in error, that you only had to format if you used MTP mode. It doesn’t matter for me, I can’t even fit 3,000 on my Fuze, but I want to be sure I’m understanding it properly.
Update, start your Fuze, then select Format on the device. This should do the trick.
Bob :smileyvery-happy:
That’s the only way to get the 8000 track availability? I was under the impression, perhaps in error, that you only had to format if you used MTP mode. It doesn’t matter for me, I can’t even fit 3,000 on my Fuze, but I want to be sure I’m understanding it properly.
Like the update. thanks for supporting the device this way!
Question. The folders, which is fine, shows all my podcasts or audiobooks on my card as music. They were taggedaas Podcasts or Audiobook. When I was on ‘play all’ it played one of those. Yes they do show up under Podcasts and Aundiobooks. But also as “music”. Same with the Audiobooks. If I want to just listen to music and not near my player I won’t have the opportunity go to the next “song”. I don’t have another card with me to see if it’s just this card. I did shut the player off, take the card out, turn the player on, shut it off, put the card in and it’s the same.
@pfh wrote:
In case anyone else gets tripped up: when I first inserted my slotRadio card, I couldn’t figure out how to make it work. There should be a big red slotRadio icon between Music and Videos; I’m not sure if it I just missed it, but I didn’t see it until after I turned the player off-and-on while the card was inserted.
Where did you get the slotRadio card? I thought they were not available for purchase yet?
I just added the new firmware and I am still checking out all the features. The first thing I noticed was that when you go to settings and information, The number of songs are listed, but the number of podcast, audiobook, and pictures are zero. The files are still available on my fuze.
Just a thought.
Also, I’m sure this is an easy answer, but thought I would ask anyway.
I see where the folders, folder was added.
I Currently add files using MTP and windows Media player. If I wanted to use the folder feature, Do I have to change to MSC, or can I just drag and drop and still be in MTP?
Thank you
I also noticed as stated above that the folders-folder has the audiobook, and podcast under the music for both internal and external cards.