Charging Problem with Wall Adapter

[csavery]

Some chargers have pullup resistors on the data lines to cause the Fuze to think it’s connected. I know this from experience - it’s typically the ones designed for phones. I had one like this and found that by cutting the traces for the two middle (data) lines it started to work correctly. You could also use a modified cable where the two middle lines are cut. I also tested this first by taping the two middle pins to see if it would work before making the mod. Once the Fuze detects it’s connected but cannot actually connect with this type of adapter it stops it from charging at all. I found this small mod fixed this and now it works fine. Hope this helps.