Reply
Newbie
Posts: 3
Registered: ‎06-14-2016

MacBook Pro (13"; 2011): Issue with initialize the new ScanDisk Ultra 2 480 gb

Hey!

I´ve put the new SSD into Inateck and plugged in with USB. The OS X 10.11.5 wants to initialize the the SSD but there are no option to do it...

 

Whats wrong?

Thanks

SanDisk Senior User
Posts: 147
Registered: ‎10-25-2013

Re: MacBook Pro (13"; 2011): Issue with initialize the new ScanDisk Ultra 2 480 gb

Hello, 

 

as far as i know there are some issues to initialize the ssd with some extran sata boxes like the one you are using. so in that case try a direct sata port or a sata cable direct to see if that works. 

 

 

Newbie
Posts: 3
Registered: ‎06-14-2016

Re: MacBook Pro (13"; 2011): Issue with initialize the new ScanDisk Ultra 2 480 gb

ok thanks, I will try and send a feedback.

Newbie
Posts: 3
Registered: ‎06-14-2016

Re: MacBook Pro (13"; 2011): Issue with initialize the new ScanDisk Ultra 2 480 gb

...I bought today this adapter but it still could not recognize the scandisk.

Any suggestions?

Thanks

SanDisk Senior User
Posts: 147
Registered: ‎10-25-2013

Re: MacBook Pro (13"; 2011): Issue with initialize the new ScanDisk Ultra 2 480 gb

hello,

 

in that case i suggest contacting the support direct that might  have an idea 

http://kb.sandisk.com/app/ask/session/L3RpbWUvMTQ2NTg5NzA1MS9zaWQvd0RUbmgqU20%3D

 

 

SanDisk Guru
Posts: 4,548
Registered: ‎07-18-2007

Re: MacBook Pro (13"; 2011): Issue with initialize the new ScanDisk Ultra 2 480 gb

have you used disk utility to initialize the drive and format it? Can you post some screen shots of disk utility with the drive connected?