Just now i installed v2.0 sandisk secureaccess. I copied almost all files from v1, but few folders were in big size. When i started copy large data folders, it shows
"Microsoft Visual C++ Runtime library
Runtime error
This application has requested the runtime to terminate it in a unusal way. Please contact the application’s support team for more information."
I unplugge and plugged the usb again and checked. But still shows same error. I restarted the pc, but still same. In the last i re downloaded the v2.0 software and ran again. But still it showing same error.
I tried copying small size files also after this, but result is same.
What happened after i tried to copy large folder that v2.0 is not at all reacting
I restored it the the file folder created on the desktop. I verified all the files had been transferred successfully. The issue was when I went to copy them from the desktop folder back to the Locker and the system crashed. I tried to “undo” the copy and paste feature but it was too late since.
What is the problem with v2.0… really fail to understand
I have posted my problem on forum as well as mentioned in “ask question” in support section. But there is no reply from support team.
???
Can you try copying the data from SecureAccess 1.0 to the computer then add the files to the secureaccess 2.0 vault? let us know if you get the same error.
again try copying the data to the computer and import it in SecureAccess 2.0 from there. if you use the add files option it will ask you if you want to permenently delte the sorce files from your computer. say no and let it import the files.
The problem with what you suggest is the size of the files being copied crashed computer so the files are no longer in the desktop file folder or in the Locker.
file size should not crash your computer. I have tested with several large files, dummy files in capacity up to 10GB and have not seen any issue. Regardless if you do not delete the vault before verifying the files are in fact there on your HDD you will not run any risk of data loss. It seems your experience was not something you will likely run into when copying the data from secure access 1.0 to the computer.
Once again for appoye, can you try copying the data from secure access 1.0 to the computer then import the data to secure access 2.0 and let us know if you still see the same error.
Here’s the problem and why my files were lost. I was able to replicate the Sandisk error and took a screen shot of it but I don’t see a way to attach it or copy into this thread. It says, “The application can not add more files because the vault’s disk is full.” I have 14.9 gb free. Is it possible my files are somewhere else on the disk? It looks like only the first 20 copied over.
You are using Mac right? When you delete files from the flash drive on a Mac do you also empty the trash? If not Mac will not actually free the space that was used by the file you deleted.
Here is what you can try. Make sure the files are copied out of secure access 1.0 and are on your computer HDD. Once that is done open disk utility and erase the USB flash drive. if you ahve single files larger than 4GB make sure you use exFAT for the file system. Once the flash drive is completely empty download and install secure access 2.0 and import the files from your computer HDD to secureaccess 2.0. Once you have verified all files are now in secureaccess 2.0 you can delete them from the computer if you want to.
Did what you said except I didn’t erase everything on the flash drive. Just erased Locker 1.0 and the Vault file thinking that would free up the space. It’s still in my Mac trash so in theory it could be reinstalled on the flash drive. Tried that and it copied back to the USB flash drive and it looks like My Vault is the right size but it thinks its a new installation. Poking around the flash drive it looks like the files might be in the Locker. I counted 23 files but the drive says 24 files. Interesting, maybe all is not lost but just hiding.
just downloaded v2 from v1. now the only way to access the scandisk usb for me to open sandisksecureaccessv2-win.exe in my downloads file. how do i get the exe file onto my drive?
I have spent considerable time with sandisk on v2.0 -while they won’t acknowledge the problem-I’m quite certain you are right - it crashes when you try to add larger files. I will use this with v1.0 and won’t buy anymore of these (like to use several flash drives for backup). the only problem with v1.0 is it runs alot slower . B the way I alos tried encryptstick- it’s worse -at least the trial version…
do not hit the ok button on the error message, rather drag that error box a little bit and behind it you will see the progress box which shows file name and some other info. this is the file that is causing the error. if the file name uses reserved chars, rename the file and try again to put it in the vault.
This application has requested the runtime to terminate it in a unusal way. Please contact the application’s support team for more information."
I get this error each time I tried to encrypt a certain amount of data. These folders were all in V1 but since I “upgraded” I get this frustrating error which limits me using the full capacity of the drive. Basically, it is a 32GB drive and only 9GB is in use…when I try to add the other folder which is 9 GB in total I get the error. When it does occur, even after restarting n o other file regardless of size can be added to the vault since the runtime error appears immediately. I have to save all the data already saved to the drive back to the PC and then delete the Vault. I have done this probably 8 times over the weekend in different sequences…same error. Wasted about 10 hours of my time. The tech really need to address this error urgently. This is a serious issue. I am using Windows 7 and version 1 worked OK except for the annoying issue of not being able to edit items in the vault directly. URGENT HELP REQUIRED PLEASE.