11-08-2017 10:29 AM
It seems the read speed is ok but the write speed is really low, can you try to sanitize the drive with SSD Dashboard and test again ?
If the issue presists please contact our support center for a possible replacement
11-08-2017 12:22 PM - edited 11-08-2017 12:24 PM
"can you try to sanitize the drive with SSD Dashboard"
what do you mean by that?
btw i tried another ssd ( sdssdp128g ) and get writing speed about 300-320 MB/s
11-08-2017 01:29 PM
in SSD Dashboard software if you go to Tools tab you can see sanitize option on the left, this will wipe out all your data on the drive so make sure you have back up before you do it
If you tried the SDSSDP on the same port, it seems to be performing at reasonable speed, I think replacing the drive will likely fix your issue
11-15-2017 01:33 AM - edited 11-15-2017 01:36 AM
so, i did that sanitize thing. now i get about 160-180 MB/s
after a little more reasearch i think there are 2 possibilities:
- this ssd is damaged
- this ssd is NOT sdssda-120g-g26, it is sdssda-120g-g25
i contacted the retailer, they want to swap it / replace it.
12-12-2017 08:18 PM - edited 12-12-2017 08:20 PM
got the new ssd now - same problem.
i guess this ssd & the asmedia 106x sata 3 controller do not like each other.
is that a known problem?
12-14-2017 08:53 PM
ok, this is not a sata controller problem.
tried this ssd on another 2 computers with different sata controller - same problem
write speed allways below 180 mb/s, most of time 80-90 mb/s
never ever i will buy sandisk again.