Reply
Newbie
Posts: 2
Registered: ‎07-29-2018

SSD Plus 240GB not recognized and sotware doesn't work

My computer doesn't recognized my 240GB Sandisk Plus SSD.

Also another compute doesn't recognized.

 

The software Acronis doesn't work from Cloning your drive with Acronis True Image WD Version 3.2 Go to: http://downloads.sandisk.com/downloads/acroniswd.exe.

 

See attachment.

 

Why do Sandisk not give downloadable software for the SSD's. I've been trying to install the SDD for hours. I've also a Samsung EVO SSD, get ready within an hour. Get software (free), installing, cloning, place SSD, ready to go.

 

 

 

Knipsel.JPG
SanDisk Guru
Posts: 4,525
Registered: ‎07-18-2007

Re: SSD Plus 240GB not recognized and sotware doesn't work

if the SSD is not recognized by the computer then any cloning software will not see it either.

 

How are you connecting the SSD to the computer? If you have tried different cables and different computers the drive may be bad and may need to be replaced. 

Newbie
Posts: 2
Registered: ‎08-20-2018

Re: SSD Plus 240GB not recognized and sotware doesn't work

I too have the same problem when i connect with my laptop, the drive doesnt show up in any place but shows up fine on my pc. My laptop has 7th gen intel processor. Need help with this.

Newbie
Posts: 1
Registered: ‎10-05-2018

Re: SSD Plus 240GB not recognized and sotware doesn't work

Hello,

 

I've purchased one SSD Plus 240 Gb and one SanDisk(c) SSD Notebook Upgrade Kit.

 

After connecting the disk (with the cable included in the kit) to the USB 3.0 port and intalling the Acronis software I've received the same message.

 

The worst is that the link where I have to download the software requires a 29,00 $ purchase.

 

What's wrong?

 

 

Acronis screen message.JPG
Highlighted
Newbie
Posts: 1
Registered: ‎01-20-2019

Re: SSD Plus 240GB not recognized and sotware doesn't work

I have the same problem .. with the 240GB plus sandisk

 

PS Speed IFace Hs-Bs-Tg Model
Num NT L9NO Size FSsize Free FS Type Label ABCHSV Error
---- ----- ---- ----- ----- ----- ------ --------------- ----------- ------ ----------
1- d(0) MBR 466G 11M SATA 0-0-0 ST3500413AS
-1 p(1) ---- 4.6G 4.6G 181M NTFS 27 Windows RE H System..... ACC--V
-2 p(2) --CC 461G 461G 335G NTFS 07 NTFS, HPFS Windows.... -CC--V
-3 p(3) ---- 450M 450M 54M NTFS 27 Windows RE H ........... -CC--V
1M free ------
2- d(1) UNSUPPORTED 224G 1K SATA 0-0-0 SanDisk SSD PLUS 240GB

Disk 1 properties:
BIOS number: 0x80
Geometry: 60802 255 63
Total sectors: 976773168
Logical Sector Size: 512
Physical Sector Size: 512
Logical Sector Offset: 0
Disk 2 properties:
BIOS number: 0x81
Geometry: 29187 255 63
Total sectors: 468877312
Logical Sector Size: 512
Physical Sector Size: 4096
Logical Sector Offset: 0

 

this is a report written from ACRONIS !!!!!

 

sandisk not supportet !!!!

 

i dont even like to work anymoore with such products . waste time for nothing equal to 4 samsung drives .

 

in 62 everybody was laughing about toyota and co. 

GM is down 

 

this way WD and Sandisk soon also

 

i will go with samsung and co from now on

 

even a non IT human is able to install them faster as i finde the sandisk clonesoftware on their page.

 

and at the end it does not even work ..

 

GREAT !!