07-29-2018 12:38 PM
My computer doesn't recognized my 240GB Sandisk Plus SSD.
Also another compute doesn't recognized.
The software Acronis doesn't work from Cloning your drive with Acronis True Image WD Version 3.2 Go to: http://downloads.sandisk.com/downloads/acroniswd.exe.
Why do Sandisk not give downloadable software for the SSD's. I've been trying to install the SDD for hours. I've also a Samsung EVO SSD, get ready within an hour. Get software (free), installing, cloning, place SSD, ready to go.
07-30-2018 10:54 AM
if the SSD is not recognized by the computer then any cloning software will not see it either.
How are you connecting the SSD to the computer? If you have tried different cables and different computers the drive may be bad and may need to be replaced.
08-20-2018 02:14 AM
10-05-2018 11:10 AM
I've purchased one SSD Plus 240 Gb and one SanDisk(c) SSD Notebook Upgrade Kit.
After connecting the disk (with the cable included in the kit) to the USB 3.0 port and intalling the Acronis software I've received the same message.
The worst is that the link where I have to download the software requires a 29,00 $ purchase.
01-20-2019 06:38 AM
I have the same problem .. with the 240GB plus sandisk
PS Speed IFace Hs-Bs-Tg Model
Disk 1 properties:
this is a report written from ACRONIS !!!!!
sandisk not supportet !!!!
i dont even like to work anymoore with such products . waste time for nothing equal to 4 samsung drives .
in 62 everybody was laughing about toyota and co.
GM is down
this way WD and Sandisk soon also
i will go with samsung and co from now on
even a non IT human is able to install them faster as i finde the sandisk clonesoftware on their page.
and at the end it does not even work ..