SDSSDA-120G-G25 and HD Sentinel

SSD (Solid State Drives) SanDisk® SSD Plus
1

Hi everybody,

2 weeks ago I’ve bought a SDSSDA-120G-G25. Since years I use HD sentinel to check my hard disks, and after an update to version 4.60 I’ve found what you can see in this screenshot

http://www.pcservicecr.it/wp-content/uploads/2015/10/hd_sent_4.60.jpg

the value used for ssd health is #169 Remaining life percentage (22)

I was horrified by that and tried a smart analisys with Sandisk Dashboard, this is the result

http://www.pcservicecr.it/wp-content/uploads/2015/10/dashboard.jpg

All seems ok and full working…

the different value between the two softwares is media wearout indicators: in HDSentinel is #74 and in sandisk dashboard is 0,00% 

Witch is true?

Thanx for any help and answer

Paolo

2

Hello,

in that case where the SSD is a product of Sandisk i would trust the official SSD Dashboard software that is also recommended by Sandisk direct.

If you are not sure about the smart values i would recommend contacting the support of Sandisk direct to clear you out. 

1 Like
3

Hi, I agree with you, but, to be sure, I’ll ask to sandisk support.

thanx for all

paolo

4

You are most welcome and i hope that you will receive all the information you need