And
“A9 100 100 __0 000000000000 Total Bad Block” Attrib is zero , this is unpossible on 15nm MLC ssd . Only SLC drives can shipped without any factory / initial bad block , even SLC drives there will few bad blocks…
Mine is 20 , most of people have around 15-50 initial bad block but you have 0 . Bad QC test , initial bad blocks didnt marked after production.
another thing is : Host Reads : 3342 GB
Host Writes : 2018 GB
NAND Writes : 656 GB
Thats impossible too with DRAM-less ssds without any compression .Waf is 0.318 . I didnt notice any of those when i wrote first reply but it does makes sense now , ssd fails when writing blocks. It cant even update SMART report or bad block list , initial bad blocks wasnt checked during production.
Only RMA can fix this issue
