02-23-2016 12:12 AM
Recently I bought a SanDisk Ultra II 480GB SSD disk and replaced (cloned) my boot disk in my Sony VAIO notebook.
I installed SanDisk SSD Dashboard 1.4.1 on my notebook. On the status page everything is OK for the SanDisk Ultra II 480GB SSD disk, but in the "Life Remaining" box "Not Supported" is displayed. Why is this?
Under "Tools" | "S.M.A.R.T" | "Advanced Details":
233 Media Wearout Indicator is 1.68%
241 Host GB Written is 186
What can I deduce from this information?
Model String: SanDisk Ultra II 480GB
03-04-2016 06:57 AM
I couldn't get any response from georgealon. But I am just curious: Can you post the following S.M.A.R.T. information from your Dashboard?
5 Re-assigned NAND Block Count
170 Grown Bad Block Count
199 CRC Error Count
233 Media Wearout Indicator
234 NAND GB Written SLC
241 HOST GB Written
242 HOST GB Read
03-04-2016 08:21 AM
I know there is a problem with "Life Remaining", especialy with new drives. I am working on it and should have an update soon.
03-04-2016 02:22 PM
Please exit and re-launch the Dashboard application. The Media Wearout attribute should be 230 and not 233.
Please check and let me know.
03-05-2016 12:12 AM
There is no change. Dashboard is still 1.4.1. And I checked for Dashboard update also.
But, you are right:
233 (E9) is Total GB Written to NAND
230 (E6) is Percentage Total P/E Count
as reported by CrystalDiskInfo.
In the link below you will find a screenshot from CrystalDiskInfo: