SanDisk SSD Dashboard

[fedkad]

Recently I bought a SanDisk Ultra II 480GB SSD disk and replaced (cloned) my boot disk in my Sony VAIO notebook.

I installed SanDisk SSD Dashboard 1.4.1 on my notebook. On the status page everything is OK for the SanDisk Ultra II 480GB SSD disk, but in the "Life Remaining" box "Not Supported" is displayed. Why is this?

Under "Tools" | "S.M.A.R.T" | "Advanced Details":

233  Media Wearout Indicator is 1.68%

and

241  Host GB Written is 186

What can I deduce from this information?

--

Model String: SanDisk Ultra II 480GB
Maximum LBA: 937703088

[georgealon]

Hi fedkad,

Can you create and export a report from the Help menu and send it to me by private messages?

Thanks

[fedkad]

I sent you a PM. Thank you!

[fedkad]

Any news?

Thank you...

[ANXHaruhi]

I do have the same problem on the exact same drive, an Ultra II 480GB Should I PM you the report?

[fedkad]

Hi ANXHaruhi,

I couldn't get any response from georgealon. But I am just curious: Can you post the following S.M.A.R.T. information from your Dashboard?

  5 Re-assigned NAND Block Count

170 Grown Bad Block Count

199 CRC Error Count

233 Media Wearout Indicator

234 NAND GB Written SLC

241 HOST GB Written

242 HOST GB Read

[georgealon]

Hi Guys,

I know there is a problem with "Life Remaining", especialy with new drives. I am working on it and should have an update soon.

Thanks

[georgealon]

Hi Guys,

Please exit and re-launch the Dashboard application. The Media Wearout attribute should be 230 and not 233.

Please check and let me know.

Thanks

[fedkad]

Hi georgealon,

There is no change. Dashboard is still 1.4.1. And I checked for Dashboard update also.

But, you are right:

233 (E9) is Total GB Written to NAND

230 (E6) is Percentage Total P/E Count

as reported by CrystalDiskInfo.

In the link below you will find a screenshot from CrystalDiskInfo:

https://dl.dropboxusercontent.com/u/89698782/2016-03-05_CrystalDiskInfo.JPG

[georgealon]

Could you try to reboot your system?