"Installation Failed, Please Try Again Later" on 1.4.2 install

Removing the registry key worked, thanks!

Worked like a charm, thank you! 

I kindly confirm the BS workaround! :slight_smile: You need to re-install the previous version, then uninstall it from the Windows programs list. I restarted my computer just to be 100 % sure then proprely installed the newest version. Somehow the installator cannot handle the task or proprely removing the software. so the uninstall is incomplete and unless you do this workaround, you will never be able to do so. Sandisk, please fix this though, because the average joe will never reach this forum.

1 Like

Uninstall from the control panel of 1.4.1 doesn’t uninstall 1.4.1, it seems to trigger installation of 1.4.2.  No joy here.  Reverting to 1.4.1 until Sandisk figures it out.

Gary

SUCCESS.  Deleting the sandisk folder under Programs(X86) combined with deleting the registry key let me install 1.4.2 without having to reinstall 1.4.1.  Hopefully this helps sandisk sort out the installation issue, they don’t want the general user population editting the registry to make their software work! 

Gary

First, this shouldn’t have been rolled out in the first place. Second, I shouldn’t have to read through seven pages of forums to find possible fixes.

That said, thank you georgealon for providing a sanctioned download for v1.4.1, since most normal users will need it to fix this problem. (shouldn’t be buried on page 6)

After encountering this error and reading all these pages, I ran the v1.4.1 installer. I closed the dashboard and uninstalled using the ‘Programs and Features’ uninstall. This didn’t work for me and I never found an .msi file.  I re-ran the v1.4.1 installer and it was automatically in Uninstall mode. I completed that and checked the C:\Program Files (x86)\SanDisk\SSD Dashboard folder. The only thing left was a folder named “smart”. I was then able to successfully install the v1.4.2 dashboard. 

File checksums

(v1.4.1) SanDiskSSDDashboardSetup.exe md5: 860149c66ee850faaa4edd96f2cf53d3

(v1.4.2) SanDiskSSDDashboardSetup.exe md5: e4adaa96bfa36165007fa4d1dc0f27d1

Until support assembles an installer capable of properly uninstalling v1.4.1 and fixing this mess, this forum needs to sticky the workaround (mine or someone else’s) or say you’re working on the problem.

tl;dr   If you get this error, download the old version 1.4.1 dashboard installer.[link] Run it, then close the dashboard. Right click the dashboard icon in the lower right systray and exit. Run the v1.4.1 installer again. It will say “Uninstall”. Then run the new v1.4.2 installer.[link] Done.

I looked everywhere on how to send a PM and could not find it.  Where is that in this forum?

clayc,

best, and most consise, message I found about “Installation Failed, Please Try Again Later” on 1.4.2 install.  

Followed the 4 step process of:

1 install SanDisk 1.4.1

2 close the dashboard, and in the system tray also

3 install SanDisk 1.4.1  (actually –> Uninstalls  <– the dashboard)

4 install SanDisk 1.4.2

Worked like a CHARM.  I had been beating this beast for 2 hours of reading the forum, installing, uninstalling, looking for registry entries… AAUUUGGGHHHH!

Your right it SHOULDN"T be buried on page 7.

Thanks again.

1 Like

That worked for me !!!

Worked perfectly, thank you…

The way I got it to work; after 1.4.2 failed, which it removed from the “Programs” list; was to delete the registry key HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\SanDisk  … Then 1.4.2 installed without any issues …

3 Likes

Sandisk 1.4.2 installed properly  . . . after havingf the same installation fail 5 times read numerous posts here,  heres how . . . The process requires uninstalling SanDisk DashBoard 1.4.1from the contol panel  . . . . and went went to > This PC > Downloads > uninstalled Sandisk set-up for 1.2.1 then open and installed Sandisk 1.4.2.

In othere word have the set up for 1.4.2 , unistall SanDisk Dashboard 1.2.1 and re install 1.4.2

Please have a basic PC knowledge before performing this operation ,DYOR

Cheers

This is the procedure worked for me

  1. Install 1.4.1

After click finish 1.4.1 will open. Close it and close it from the tray too

  1. Again install 1.4.1 - this time install will unistall 1.4.1

  2. install 1.4.2

Hope it will work for everyone

1 Like

Thanks iLDaWg, that worked for me, when I tried installing and uninstalling the previous 1.4.1 version it just seemed to kick off and upgrade and fail.

But after I deleted that registry key the installation worked.

@kostasxanthakos wrote:

This is the procedure worked for me

  1. Install 1.4.1

After click finish 1.4.1 will open. Close it and close it from the tray too

  1. Again install 1.4.1 - this time install will unistall 1.4.1
  1. install 1.4.2

 

Hope it will work for everyone

it works.

I also found other way to install 1.4.2. without installing older version

in registry delete the key HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\SanDisk

btw im using windows 10 64bit pro so it may be somehow different key for other version of windows

*devs still need to create working unistall routine :confounded:

Tôi cố định cài đặt của tôi bằng cách xóa các khóa registry này cùng với các thư mục chương trình (Win10 Pro 64bit)

Major Geeks does NOT have 1.4.1, that I could find anyways.  

Google search comes up dry for downloading 1.4.1.

This is the only option that worked for me:

iLDaWg

Newbie

iLDaWg

Posts: 1

Registered: ‎04-22-2016

Re: “Installation Failed, Please Try Again Later” on 1.4.2 install

Options

‎04-22-2016 02:52 PM

The way I got it to work; after 1.4.2 failed, which it removed from the “Programs” list; was to delete the registry key HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\SanDisk  … Then 1.4.2 installed without any issues …

Message 74 of 78 (796 Views)

Add Tag…

Thanks

This is the only option that worked for me.  Thanks a bunch  :D

I’ve fixed this problem on my laptop. Therefore, I’d like to share my experience here.

After clone my system disk to SSD via EZ Gig IV software, I found the Dashboard application can’t run properly.

When re-install 1.4.2 version, I also get the same problem.

I’ve tried to delete register keys, but the problem is still observed.

I found the Sandisk SSD Dashboard Service is existed on Services List(Control Panel &nbsp;Administrative Tools &nbsp;Services)

At first, I tried to delete this service via below command:

  sc delete “SanDisk SSD Dashboard Service”

Second, I removed the below register key:

  HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\SanDisk

Finally, reboot my laptop.

After that, I could install the Dashboard appliation without any issue.

V 1.4.2 does not install correctly on Windows 10 Pro 64