Reply
Highlighted
Newbie
Posts: 1
Registered: ‎07-27-2015

Max 350 MB/s on SEQ. Need assistance

Hello, I cant seem to get higher than 350 MB/s on Disk Reads and about 260 MB/s on writes.

 

Using the Marvell tool and the SanDisk Dashboard I can see the SDD cabability (interface Speed) at 6.0 GB/s on the SATA III port.

 

My motherboard is the Z77X-UD5H with the newest rev. (F14).

 

Any help or suggestions would be appreciated!

SanDisk Guru
Posts: 4,548
Registered: ‎07-18-2007

Re: Max 350 MB/s on SEQ. Need assistance

IIRC that board has 2 different SATA controllers for the 6Gb ports. I cant remember exactly but i think it either has 2 intel ports and 3 Marvel Ports or 3 marvel and 2 ASMedia ports. Either way one of the SATA 6Gb chipsets is very slow for SATA 6Gb. Try plugging in into the other set of SATA 6Gb ports. 

Newbie
Posts: 4
Registered: ‎01-27-2015

Re: Max 350 MB/s on SEQ. Need assistance

[ Edited ]

What drivers are you using (version)?

The latest version Intel® Rapid Storage Technology 13.1.0.1058.
The latest version Marvell sata drivers 1.2.0.1047.