This problem was posted several months earlier and seems not to be resolved.
For some readers, the following statement may pose further question of interpretation.
After 99% of downloading i got this message / " disk file damaged …"
- Does the word “downloading”, in this case refer to the first transfer of the file from SanDisk to the user’s computer?
or
- Does it refer to the installation process on the SanDisk Wireless Media Drive itself?
In the first case, the error message would most likely be similar to “download incomplete”. At this point, the Media Drive would not be involved and no harm would be done and would not affect the Media Drive.
In the second case reporting file damage, an installation process may display this type of error message and the upgrade process on the Media Drive would fail.
In this case, it would be good to have had additional information in advance as a method to verify that the filed transfer from SanDisk to computer is an exact copy of the original, such as a “checksum” number. Unfortunately, SanDisk does not provide this as a means of support nor do they report file size.
The file size reported for the SanDisk Connect Wireless Media Drive Release Notes for Firmware version 3.04 on my computer is 102,027,416 bytes (102 MB on disk). The SHA1 checksum number I get for this firmware version on my computer is:
05ed2c63f121b71507082308de62154a459bec7f
I hope this will help some users.
