05-15-2014 10:44 AM
Hi guys , i purchased a Sandisk Ultra 64Gb 2 weeks ago , i have been using it fine for a week, yesterday i plugged the microsd into the SD adapter and plugged it into my laptop, the laptop took about 2 mins to detect it in Windows 8 but only as a hard drive, it would not open the drive nor could i see any files,
after about 5 mins of messing about trying to get it to work ii gave up, when i tried to remove the card it was literally too hot for me to do so, i have to power off my computer , wait a few minutes and then remove it ,i looked at the microsd and it now has a crack in the microsd, i am really just trying to find out if anybody else has had anything similar happen
i have been using memory cards for years and never had anything like this happen before, it could have been very dangerous and the outcome far worse.
05-16-2014 01:57 AM
Hi Tapeworm, thanks for your reply, i am going to contact the people i purchased it from, see what they have to say, it could have been extremely dangerous., i have just inserted the microsd into the sd adapter again this morning and plugged it into the laptop.it is doing to exact same thing, regarding heat so they can have a look for themselves at the problem
11-05-2018 01:18 AM
I have the exact same issue, im using a 32gb for the Raspberry Pi , worked fine for some weeks. Then suddenly it wont boot.
I burned my fingers on de SD-Slot. When it cooled down i took it out and it was slighty bend, wit a fine crack on the top. The card is useless at the moment. Im afraid to use the 64 one in my drone .
Who has the same experience , with a faulty overheating card ?