02-15-2011 11:28 AM - edited 02-15-2011 02:06 PM
Hi All. I have been trying to get help in being able to use this card again. It is a Sandisk 16GB Micro SD (Transflash) and it has worked well for many months then one day it just stopped working. If I put it into a computer is recognises there is a card but instantly says I need to format it, even if I accept this it says cannot be formatted.
NOW, When the format box comes up, in the 'Capacity' box it shows as 30.6MB. I cannot change this even after trying all formatting options all I get is 'Windows is unable to complete the format'
I have accepted the fact that I have lost all the data on it, but really want to get it going again.
Funnily enough I also have a 8GB of same type from which I recovered the data, but won't let me format it as it thinks it has the little write protection switch on, but obviously the micro SD car doesn't have a switch. I have put it into an adapter and moved this switch but to no avail.
Any help would be great.
02-20-2011 10:19 PM
Hi, I have the same problem but with a SanDisk 8 GB MicroSDHC (class 4, I think) card. It worked well on my HTC Legend for a month plus - I could read and write on it - and then without noticing it, the care write-protected itself. I only realised this recently when I downloaded a file and took some pictures with the phone. Everytime I tried to access the new files either through my phone or PC, the file "mysteriously" disappears. The old files are still there and I can make a backup of the card.
I have tried using the recommended troubleshooting steps of using and microSD adapter and toggling the physcial lock switch e times, keeping it at the lock position for 30 seconds and finally sliding to the unlock position but to no avail also.
02-26-2011 06:07 AM - edited 02-26-2011 10:51 AM
'Still' waiting for a reply from SanDisk UK, despite two emails, the US department was an instant communication but sad to say no one from UK department is responding??? Poor show so far
05-22-2011 11:13 AM
Well..I have this exact problem...
I have a Sandisk Extreme Pro 16GB SDHC myself...Worked great untill yesterday, when it apparently figured it would be a good idea to go die or something... This severely pisses me off, I'm unable to format it, I'm unable to write to it, I'm unable to delete anything.. And here I go buying SanDisk due to needing something that will last :/
I'm calling the shop I bought it from.. The card is just over 2 months old, sure hope these cards are supposed to "live" longer than this.
05-22-2011 11:38 AM
06-22-2011 12:28 PM
Hello JKwok, May I inquire as to whether you solved your problem with your SD card? I am experiencing essentially the same anomaly with my SD card, and I feel the same way you do about wanting to protect to contents of the card. I want to exhaust all possibilities of retrieving the data that is on it (my last back up was a few weeks ago). To me, it seems very interesting that so many people all report the same 30.6mb when their card failed. To me, I am at the very least, curious as to what exactly failed on the card and why it failed, if for no other reason than to help me purchase a better class card that is less inclined to fail, given how great the inconvenience and cost of the loss is when a card I am relying on fails in this way. If so many cards all appear to have the same failure, I would expect somehow to be able to get an explanation. Please let me know what you found out, if anything. Thanks. -John
06-22-2011 03:59 PM
out of the millions of these cards on the market the reports are really not very significant. i can gurrantee it will be less than 1%. that said it would apprear to me to be a controller failure since it is reporting the capacity incorrectly but that is just a guess. most companies I have delt with dont release information on spicific failures unless there is a need for recall and at less than 1% failure rate this is not a recall situation.
07-04-2011 01:38 PM
Same exact problem here with my 16gb MicroSD HC card. Called : 866-726-3475 and 45 minutes later they are replacing my card. There is a lifetime warranty on the card. The call center is in India so be prepared to be very frustrated and repeat yourself numours times! The technician I spoke to treated me like I was quite computer illiterate. I had to use the phonetic alphabet (alpha, bravo, charlie...) so he could understand me... Overall this will be my last Sandisk purchase for lack of customer service!
edit : looks like I am going to have to call them back as the guy setting up my RMA hung up on me. JOY...JOy......joy!
02-24-2012 08:15 AM - edited 02-24-2012 08:24 AM
My problem was that I bought sandisk 16 gb micro sdhc class4 memory card and from the first day I couldn't format it on my computer. Windows cmd didn't help and format through my computer said that windows was unable to format.
When I connected my sdhc card with my galaxy ace what's running on android 2.3.6 it offered me to format it straight away and nothing happend. On the notification bar it said that sdhc card is blank or in different file system.
So the situation was same like with everybody else in here....
I MANAGED TO FIX IT!!! / at least so far its still working!
1) I put the micro sdhc card into my phone and connected my phone to my windows 7 pc.
2) in my phone I went to settings - sd card and storage - mount (in some point it didn't mount but after trying few times it did)
3) then I took down my notification bar and clicked "use sd card as storage" / "use sd card in storage mode" or something like that.
4) then took my pc by using that https://www.sdcard.org/consumers/formatter/
it found my sd card. Only setting what I changed was... Full overwrite erase format( NOT QUICK FORMAT )
Format took about 30-45 min.
After that I took my phone and safely removed from computer, took the sd card out put it back in and the phone said it is damaged sd card. I went back to settings - sd card and storage and mounted again and it started working... Phone said that I have 14.8gb or something like that free space and I was able to store stuff through usb to phones sd and everything seems to be working so far!
I hope that will help everybody!!!