The Clip Zip can locate all files on the card, regardless of mode of transfer used (MTP or MSC), but the device’s USB controller will show only one mode at a time when accessed from the PC (Sansa plugged in).
Using a separate card reader, the card will generally be accessed as an MSC device. The Clip Zip can access the card in either mode.
If no files are showing when accessed from the Clip Zip (unplugged), try transferring a single file to the card using the Clip Zip as the reader.
MicroSD card compatibility was addressed in the latest build of the Clip Zip’s firmware. If you havent done so yet, update the Clip Zip’s firmware using the Sansa Updater, or by following the steps in the firmware threadhere.
microsansa
