Ultra Fit USB 3.0: Excessive Heat

I have the solution for you all.

I was using a usb3 extension cable and the sandisk 32GB was getting very hot.

(I previously had a sandisk OTG in there, and it too got frighteninly hot)

That cable had plastic shrouding over all of the female socket.

I looked through my previous ebay purchases, and found a 1M usb 3 cable with the female end bare metal (no plastic covering).

I tested the 32GB in it for 30 minutes, and just ejected it now, and it is slightly warm (NOT HOT)

I did not have any fan, and the room is 20C.

Another thing to be wary of, is ensuring you get a cable with a snug fit. For two reasons -

  • I have had total loss of data when wiggle occured at a crucial time (mind you that was an external pocket 2.5" drive)

  • A snug fit will help with heat transfer

The cable I previously purchased was most likely the same as this current ebay listing -

1M USB 3.0 Extension Data Cable SuperSpeed - A Male to A Female - AU STOCK

http://www.ebay.com.au/itm/1M-USB-3-0-Extension-Data-Cable-SuperSpeed-A-Male-to-A-Female-AU-STOCK-/252448044306

It was many months ago when I purchased mine.

I just rang the company, and they tell me that they have not changed supplier for 8 months, so there is a good chance that the current ebay listing (above link), is identical to mine.

Rob

PS I have just ordered some more, so I will report back to confirm whether they are the same. (should only takes days, as they and I, are both in Melbourne Vic Australia)