hello recently i put the ssd sandisk g3 120gb (SDS7CB-120G-G25) on my macbook pro 13’ 2010 mid i also have installed mavericks on my mbp
i run speed tests with blackmagic speed test and i see only 80mb/s write/read… is too slow…can someone help me to fix this?
my infos on mbp is:
NVidia MCP89 AHCI:
Vendor:NVidia
Product:MCP89 AHCI
Link Speed:3 Gigabit
Negotiated Link Speed:3 Gigabit
Physical Interconnect:SATA
Description:AHCI Version 1.30 Supported
SanDisk SDS7CB120G00000:
Capacity:120.03 GB (120,034,123,776 bytes)
Model:SanDisk SDS7CB120G00000
Revision:1.000000
Serial Number:101201300404
Native Command Queuing:Yes
Queue Depth:32
Removable Media:No
Detachable Drive:No
BSD Name:disk0
Medium Type:Solid State
TRIM Support:Yes
Partition Map Type:GPT (GUID Partition Table)
S.M.A.R.T. status:Verified
Volumes:
EFI:
Capacity:209.7 MB (209,715,200 bytes)
BSD Name:disk0s1
Content:EFI
Macintosh HD:
Capacity:119.17 GB (119,174,365,184 bytes)
Available:57.29 GB (57,288,663,040 bytes)
Writable:Yes
File System:Journaled HFS+
BSD Name:disk0s2
Mount Point:/
Content:Apple_HFS
Volume UUID:0508F3D4-0B1A-39F4-9E2A-136C63024B8C
Recovery HD:
Capacity:650 MB (650,002,432 bytes)
BSD Name:disk0s3
Content:Apple_Boot
Volume UUID:E28F47D1-D0D9-3343-8A60-7A85172A75C0