Windows 10 installation error

SSD (Solid State Drives) SanDisk SSD Dashboard
#10

Please uninstall your current version and make sure the SanDisk folder under “Program Files” or “Program Files (x86)” is clean.

When installing version 1.4.2, make sure the file “SanDiskSSDDashboardServiceSetup.msi” is present in the SSD Dashboard folder and that looking at the properties, the digital signature is from SanDisk and valid. Somehow that disgital signature was incorrect with the previous installer. Please report any issues regarding this, for example if you see an invalid digital signature. Thanks  

#11

@ @georgealon  : your installation tips don’t work, first because the installer file isn’t a msi file, but it’s an exe file. Then, even if the SanDisk folder under “Program Files” or “Program Files (x86)” is clean, the installation failed. I don’t know what exactly what it occurs, and why the installation failed each time.

The only way that worked for me is the method of @paulyates :

@paulyates wrote:

So, I finally got mine working after numerous failed attempts. Here’s exactly what I did…

 

  • Download dashboard 1.4.1 from Major geeks and install.
  • Close dashboard (from system tray too),
  • Use control panel - Programs and Features to remove version 1.4.1.
  • Install 1.4.2

No other actions between these steps (IE No need to reboot etc).

 

I can only assume that the 1.4.2 upgrade does not remove everything it should when it deinstalls 1.4.1

 

2 Likes
#12

Digital signature for my SanDisk SSD Dashboard Service Setup property shows Microsoft corporations. Is this why I can not update my pc to current 1.4.2?

#13

Thanks for the suggestion - it worked!

#14

The digital signature should be from SanDisk not Microsoft. You have the wrong installer. Please download the new 1.4.2 setup file (again).

#15

I’m sorry that I didn’t explain myself well.  I ment say that a file of SanDiskSSDDashboardServiceSetup.msi property of digital signature is Microsoft.  NOT SanDisk.  Now what do I do?

Thanks,

#16

Same problem here. 1.4.2 will not install over 1.4.1 (Windows 10).  Solution is to remove 1.4.1 from Control Panel before clean installing 1.4.2.

#17

beckyo54

The digital signature should be from SanDisk not Microsoft and that’s why it fails to tinstall.

We found this issue and replaced the SanDiskSSDDashboardSetup.exe file on our cloud server. The new file is now with SanDisk disgital signature. Unfortunatly, sometimes Windows caches downloaded files and even after downloading the new updated file, it will launch the old one. Try to reset your cache and download the file from SanDisk support site again.

Sorry for the inconvinience.

#18

I was notified update 1.4.2 by Sandisk SSD Dashboard at yesterday.

But failed update 1.4.1 to 1.4.2 

I can’t search the 1.4.1 anywhere.

Please someone upload legacy version.

#19

@georgealon

Try to reset your cache and download the file from SanDisk support site again.

 It does not working. certifications is fine. (SanDisk Corporation - Symantec Time Stamping Services Signer - G4)

#20

Works fine - Thanks

#21

What worked for me.

  1. Download http://downloads.sandisk.com/Dashboard/SanDiskSSDDashboardSetup.exe

  2. Try to install SanDiskSSDDashboardSetup.exe

  3. Go to C:\Program Files (x86)\SanDisk\SSD Dashboard

  4. Find and double click SanDiskSSDDashboardSetup.exe there.

It worked for me. However, before I disabled digital signature. I don’t know if it is mandatory.

#22

I had the same problem with Windows 10 64bit.

Ended up deleting the Sandisk folder from the x86 Programs folder and then running the install again for 1.4.3 and it worked fine for me.

Must be something in their installer that doesn’t like things exisiting and it doesn’t know what to do so fails install.

Cheers

#23

@sn618 wrote:

Currently running 2 x 240gb Ultra II’s in a RAID 0. I’m trying to install the SSD Dashboard on Windows 10, but it keeps giving me an error:

“The Installation failed. Please try again later.”

 

Any tips on how to resolve this? I am currently using an administrator account. Below is the ending of the installdbservice.log if it anybody can decipher it:

 

Property(S): OriginalDatabase = C:\Program Files (x86)\SanDisk\SSD Dashboard\SanDiskSSDDashboardServiceSetup.msi
Property(S): UILevel = 2
Property(S): ACTION = INSTALL
Property(S): VSDFxConfigFile = C:\Users\ADMIN\AppData\Local\Temp\CFGFEE8.tmp
Property(S): ROOTDRIVE = D:\
Property(S): CostingComplete = 1
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 0
Property(S): PrimaryVolumeSpaceRequired = 0
Property(S): PrimaryVolumeSpaceRemaining = 0
Property(S): INSTALLLEVEL = 1
Property(S): SOURCEDIR = C:\Program Files (x86)\SanDisk\SSD Dashboard\
Property(S): SourcedirProduct = {EE9255E4-283A-4318-ABB6-A75BEE59ACA3}
Property(S): ProductToBeRegistered = 1
MSI (s) (8C:DC) [11:40:59:008]: Note: 1: 1708
MSI (s) (8C:DC) [11:40:59:008]: Product: SanDisk SSD Dashboard Service – Installation failed.

 

MSI (s) (8C:DC) [11:40:59:008]: Windows Installer installed the product. Product Name: SanDisk SSD Dashboard Service. Product Version: 1.0.0. Product Language: 1033. Manufacturer: SanDisk Corporation. Installation success or error status: 1603.

 

MSI (s) (8C:DC) [11:40:59:012]: Deferring clean up of packages/files, if any exist
MSI (s) (8C:DC) [11:40:59:012]: MainEngineThread is returning 1603
MSI (s) (8C:3C) [11:40:59:014]: RESTART MANAGER: Session closed.
MSI (s) (8C:3C) [11:40:59:014]: No System Restore sequence number for this installation.
=== Logging stopped: 10/25/2015  11:40:59 ===
MSI (s) (8C:3C) [11:40:59:024]: User policy value ‘DisableRollback’ is 0
MSI (s) (8C:3C) [11:40:59:024]: Machine policy value ‘DisableRollback’ is 0
MSI (s) (8C:3C) [11:40:59:024]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (8C:3C) [11:40:59:024]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (8C:3C) [11:40:59:024]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (8C:3C) [11:40:59:024]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
MSI (s) (8C:3C) [11:40:59:024]: Destroying RemoteAPI object.
MSI (s) (8C:74) [11:40:59:025]: Custom Action Manager thread ending.
MSI © (D8:CC) [11:40:59:026]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
MSI © (D8:CC) [11:40:59:026]: MainEngineThread is returning 1603
=== Verbose logging stopped: 10/25/2015  11:40:59 ===

Solved!!! in order to cure Windows 10 installation errors and issues you have to know the root cause of the error first, for more you can take the help of : http://top-7-irritating-windows-10-problems-and-their-solution.webstarts.com

  

#24

Hey, I have also faced the same issue with Windows 64 bit. Well, the most common error usually user face while installing Windows 10 is the error code 0xa0000400.This is a common error that you can come across while installing Windows 10. But, do not worry because this error can be easily fixed using some manual ways like:

FIX 1 – Run the Troubleshooter

FIX 2 – Close all the Active Apps

FIX 3 – Turn off the Internet connection When the Update Download is Finished

With these ways, you can fix this error while installing Window 10 very easily. For complete details, you can also follow:

http://www.fixwindowserrors.biz/blog/fix-0xa0000400-error-installing-windows-10-anniversary-update

#25

Try these steps to fix windows 10 installtion error:

Step 1:  First you have to create a Restore Point on your Windows PC

Start button  -> in the search box type  Restore Point -> Click on the  Create Restore point  option from the list and wait until Windows creates a restore point.

Step 3:  Disable Wireless option from BIOS

To do this first close all the program and shutdown your PC.

After shutting down your PC restart it by pressing the power button and start pressing F2 to bring the BISO Settings. After entering in the BIOS Settings apply the below given changes.

  • Go to  Advanced Tab  with the help of right Arrow key.

  • Use the Advanced Tab and go to the  Wireless  option with Down Arrow Key.

  • After it press  Enter  to open Wireless option.

  • Here you will get two options,  Internal Bluetooth, and Internal WLAN.  You need to disable both the options by pressing enter key on them and then choosing  Disabled.

Exit from the BIOS Settings after saving all the modifications (Press F10 to save the changes).

Step 4:  Remove Additional RAM

Step 5:   Reboot your PC and Run the Setup

After executing all the above given steps now you need to reboot your System. After the restarting PC, go to  C:$Windows.~WS\Sources\Windows  folder and execute the  Setup.exe  file. This will start the Windows 10 installation process.

In case, you have the bootable USB Drive or Disk of  Windows 10  then you can do a clean install of Windows 10.

likewise if you rae getting windows 10 upadtion error then read this :

How To Fix windows 10 update 0x80070057 error

#26

Follow these steps to fix this:

Step 1:  First you have to create a Restore Point on your Windows PC

Start button  -> in the search box type  Restore Point -> Click on the  Create Restore point  option from the list and wait until Windows creates a restore point.

Step 3:  Disable Wireless option from BIOS

To do this first close all the program and shutdown your PC.

After shutting down your PC restart it by pressing the power button and start pressing F2 to bring the BISO Settings. After entering in the BIOS Settings apply the below given changes.

  • Go to  Advanced Tab  with the help of right Arrow key.

  • Use the Advanced Tab and go to the  Wireless  option with Down Arrow Key.

  • After it press  Enter  to open Wireless option.

  • Here you will get two options,  Internal Bluetooth, and Internal WLAN.  You need to disable both the options by pressing enter key on them and then choosing  Disabled.

Exit from the BIOS Settings after saving all the modifications (Press F10 to save the changes).

Step 4:  Remove Additional RAM

Step 5:   Reboot your PC and Run the Setup

After executing all the above given steps now you need to reboot your System. After the restarting PC, go to  C:$Windows.~WS\Sources\Windows  folder and execute the  Setup.exe  file. This will start the Windows 10 installation process.

In case, you have the bootable USB Drive or Disk of  Windows 10  then you can do a clean install of Windows 10.

likewise if you are getting windows 10 updation error then read this:

http://blog.softwaredownloadcentre.com/fix-windows-10-update-0x80070057-error
#27

Windows 10 is the latest operating system and many users are facing various errors while installing it, it might happen due to outdated drivers or incompatible hardware the issues are being faced by the users. So check if these are causing the issue, then update the outdated drivers or change the hardware.

Or else scan your PC With theWindows Repair Tool, this will help you to fix the error and repair the corrupt Windows files.

#28

I have gone through similar kind of error while installing windows 8, with code  0xc00000e9.

Following these steps helped me resolve issue.

  • Shutdown your Windows 8 or Windows 10 device.
  • After the shutdown process is completed take a look at the USB ports into your device and disconnect all USB cables except the one for your keyboard and the one for the mouse.
  • Start your device as you normally do.
  • Check and see if you still get the error code 0xc00000e9.
  • If the error code does not appear anymore then you will need to plug in one device at a time respecting the same procedure above.
  • If you notice that after you plugged in the Printer for example you get this error code then you will have to change the USB cable to the printer in this case and also update the driver for the printer to support the Windows 8 or Windows 10 operating system.
  • Updating drivers manually is very annoying, so we recommend you to download this driver updater tool (100% safe and tested by us) to do it automatically. Thus, you will prevent file loss and even permanent damage to your computer

(OR)

You will have to take into account that the Hard Drive in your device may be damaged. In this case if you have another hard drive than you can try to plug it in and see if that is the error code 0xc00000e9 is appearing because of the old hard drive.

If your hard drive is causing the issue then I suggest taking it to a specialized repair shop and telling them exactly what the issue with your device is and what error code you get when you try to boot into the system.

We also recommend you to download this tool (100% safe and tested by us) to fix various PC problems, such as hardware failure, malware and file loss. It will also optimize your PC for maximum performance.

#30

Make sure that your device has enough space.

Run Windows Update a few times.

Check third-party drivers and download any updates.

Unplug extra hardware. Check Device Manager for errors.

Remove third-party security software.

Repair hard-drive errors. Do a clean restart into Windows.

  • Fix Driver errors.
  • Keep your PC on and try installing again.
  • Turn off VPN software and increase the size of System Reserved partition.
  • Check for pending updates.
  • Uninstall incompatible apps.
  • Check if your computer meets the minimum requirements.
  • Free up space on your hard drive.
Legal | Terms of Use | Privacy Statement | Forum Terms of Service Sandisk logo
© Western Digital Corporation or its affiliates. All rights reserved. Western Digital Technologies, Inc. is the seller of record and licensee in the Americas of SanDisk® products.