# Win10 will not boot with WD 6TB My Book connected

**URL:** <https://forums.sandisk.com/t/win10-will-not-boot-with-wd-6tb-my-book-connected/410061>\
**Category:** External SSD for Windows\
**Created:** [April 13, 2016, 6:26pm UTC](https://forums.sandisk.com/t/win10-will-not-boot-with-wd-6tb-my-book-connected/410061 "2016-04-13T18:26:14Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Colin\_Finney](https://avatars.discourse-cdn.com/v4/letter/c/e480ec/32.png) [@Colin\_Finney](https://forums.sandisk.com/u/Colin_Finney)\
**Post date:** [April 13, 2016, 6:26pm UTC](https://forums.sandisk.com/t/win10-will-not-boot-with-wd-6tb-my-book-connected/410061/1 "2016-04-13T18:26:14Z")

</div>

I have just purchased a WD 6TB My Book and have been using it for a week now. I powered down my PC yesterday for the first time over that week as far as I can remember and when I powered it back on Win10 would not boot but gives me an error message relating to external USB device being removed during boot sequence.

I have been through my BIOS but nothing seems to make any difference and the message is from Win10 not my BIOS.

I am using a USB keyboard and mouse so cant turn of legacy USB support.

The My book is connected via a USB3 port. Once Win10 boots and I re-connect the WD My book it works just fine. All the health check pass OK.

Any ideas before it goes back to Amazon.

---

<div class="post-metadata">

**Author:** ![Trancer](https://sea2.discourse-cdn.com/sandisk/user_avatar/forums.sandisk.com/trancer/32/36707_2.png) [@Trancer](https://forums.sandisk.com/u/Trancer)\
**Post date:** [April 14, 2016, 6:55pm UTC](https://forums.sandisk.com/t/win10-will-not-boot-with-wd-6tb-my-book-connected/410061/2 "2016-04-14T18:55:53Z")

</div>

I was going to suggest disabling legacy USB support, but it seems this is not possible in your particular case due to your keyboard and mouse.

---

<div class="post-metadata">

**Author:** ![Colin\_Finney](https://avatars.discourse-cdn.com/v4/letter/c/e480ec/32.png) [@Colin\_Finney](https://forums.sandisk.com/u/Colin_Finney)\
**Post date:** [April 14, 2016, 9:47pm UTC](https://forums.sandisk.com/t/win10-will-not-boot-with-wd-6tb-my-book-connected/410061/3 "2016-04-14T21:47:29Z")

</div>

I run two PCs via a KVM as I have legacy software on an old XP PC I can’t move over to the my newer Win10 PC and that forces me to use USB keyboard and mouse.

I do have an old PS2 keyboard and mouse so I might try it to see if it makes a difference if I can find that option in my BIOS as I did not see it previously…

---

<div class="post-metadata">

**Author:** ![Colin\_Finney](https://avatars.discourse-cdn.com/v4/letter/c/e480ec/32.png) [@Colin\_Finney](https://forums.sandisk.com/u/Colin_Finney)\
**Post date:** [April 15, 2016, 8:54am UTC](https://forums.sandisk.com/t/win10-will-not-boot-with-wd-6tb-my-book-connected/410061/4 "2016-04-15T08:54:31Z")

</div>

Something I have noticed in my BIOS is when the WD 6TB My Book is connected I get two USB devices shown, see attached.

 ![](https://global.discourse-cdn.com/sandisk/original/3X/2/d/2dd122953f0ad0b0b5fd42c2ff568a4e6923aa59.jpg)

---

<div class="post-metadata">

**Author:** ![Colin\_Finney](https://avatars.discourse-cdn.com/v4/letter/c/e480ec/32.png) [@Colin\_Finney](https://forums.sandisk.com/u/Colin_Finney)\
**Post date:** [April 21, 2016, 11:04am UTC](https://forums.sandisk.com/t/win10-will-not-boot-with-wd-6tb-my-book-connected/410061/5 "2016-04-21T11:04:53Z")

</div>

I returned the drive and have received a replacement which is doing exactly the same.

Any suggestion’s.

---

<div class="post-metadata">

**Author:** ![Colin\_Finney](https://avatars.discourse-cdn.com/v4/letter/c/e480ec/32.png) [@Colin\_Finney](https://forums.sandisk.com/u/Colin_Finney)\
**Post date:** [October 1, 2016, 12:44pm UTC](https://forums.sandisk.com/t/win10-will-not-boot-with-wd-6tb-my-book-connected/410061/6 "2016-10-01T12:44:38Z")

</div>

I am back again. I fixed the problem but I can’t remember what I did but a recent Win update has undone my fix so yet again I can’t boot my PC if my WD drive is attached.

---

<div class="post-metadata">

**Author:** ![TZUE](https://avatars.discourse-cdn.com/v4/letter/t/e495f1/32.png) [@TZUE](https://forums.sandisk.com/u/TZUE)\
**Post date:** [October 4, 2016, 1:08am UTC](https://forums.sandisk.com/t/win10-will-not-boot-with-wd-6tb-my-book-connected/410061/7 "2016-10-04T01:08:58Z")

</div>

Just a shot in the dark, change your boot order to reflect your C:drive and CD-Rom only.
