# WD Passport 4TB and WD Elements 4TB (Portable) - SMART enabled?

**URL:** <https://forums.sandisk.com/t/wd-passport-4tb-and-wd-elements-4tb-portable-smart-enabled/308276>\
**Category:** Portable SSD\
**Created:** [November 27, 2017, 10:23am UTC](https://forums.sandisk.com/t/wd-passport-4tb-and-wd-elements-4tb-portable-smart-enabled/308276 "2017-11-27T10:23:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![foobar1999](https://avatars.discourse-cdn.com/v4/letter/f/7feea3/32.png) [@foobar1999](https://forums.sandisk.com/u/foobar1999)\
**Post date:** [November 27, 2017, 10:23am UTC](https://forums.sandisk.com/t/wd-passport-4tb-and-wd-elements-4tb-portable-smart-enabled/308276/1 "2017-11-27T10:23:15Z")

</div>

Hello everybody

I have bought the 4TB Passport (the new designed) and the 4TB Elements (portable) drives recently.

I normally check the drive before use under linux using smartctl.

When I ran this on the 4TB Elements drive, it reported that SMART was **not** supported? Is this correct?

I haven’t run this on the 4TB Passport yet - but would like to know before I open the box to give me chance to return it.

Thanks

---

<div class="post-metadata">

**Author:** ![foobar1999](https://avatars.discourse-cdn.com/v4/letter/f/7feea3/32.png) [@foobar1999](https://forums.sandisk.com/u/foobar1999)\
**Post date:** [November 27, 2017, 10:28am UTC](https://forums.sandisk.com/t/wd-passport-4tb-and-wd-elements-4tb-portable-smart-enabled/308276/2 "2017-11-27T10:28:05Z")

</div>

BTW I should have mentioned that SMART is an acronym and stands for Self-Monitoring, Analysis and Reporting Technology - it’s built into most most ATA/SATA and SCSI/SAS hard drives and solid-state drives. It allows you to check the health of the drive and foresee (and more importantly take preventative actions) before they arise.

I have other 3.5" internal and external drives by WD and they all support SMART. This is the first WD drive I have come across that does not seem to.
