# Virtual CD Manager cannot configure drives on firmware 20.18

**URL:** <https://forums.sandisk.com/t/virtual-cd-manager-cannot-configure-drives-on-firmware-20-18/407653>\
**Category:** WD Software\
**Created:** [December 3, 2010, 3:38am UTC](https://forums.sandisk.com/t/virtual-cd-manager-cannot-configure-drives-on-firmware-20-18/407653 "2010-12-03T03:38:08Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![abilstein](https://sea2.discourse-cdn.com/sandisk/user_avatar/forums.sandisk.com/abilstein/32/64246_2.png) [@abilstein](https://forums.sandisk.com/u/abilstein)\
**Post date:** [December 3, 2010, 3:38am UTC](https://forums.sandisk.com/t/virtual-cd-manager-cannot-configure-drives-on-firmware-20-18/407653/1 "2010-12-03T03:38:08Z")

</div>

In an attempt to hide the WD Smartware VCD from my device list, I followed WD instructions to update the firmware and then use the VCD Manager to configure the drives.

I updated the firmware on two drives (both My Passport for Mac 500GB) to 20.18 without any problems. But then when attempting to configure drives with the VCD Manager, I get a message saying that the Manager cannot configure the drives as they are and I must upgrade the firmware. I cannot upgrade the firmware any higher.

Looks like other people are having this problem too. It seems the firmware is a recent release, but the VCD is from Nov 2009? Maybe it’s just not expecting a firmware of higher than 1.x? Anyone successfully use the VCD manager with firmware 20.18?

---

<div class="post-metadata">

**Author:** ![Joe\_S](https://avatars.discourse-cdn.com/v4/letter/j/67e7ee/32.png) [@Joe\_S](https://forums.sandisk.com/u/Joe_S)\
**Post date:** [December 3, 2010, 4:35am UTC](https://forums.sandisk.com/t/virtual-cd-manager-cannot-configure-drives-on-firmware-20-18/407653/2 "2010-12-03T04:35:48Z")

</div>

Check this post page espesially #47 by Screwedcustomer [http://community.wdc.com/t5/External-Drives-for-Mac/My-Passport-for-Mac-frimware-update-problem/td-p/17742/page/5](http://community.wdc.com/t5/External-Drives-for-Mac/My-Passport-for-Mac-frimware-update-problem/td-p/17742/page/5)&nbsp; I don’t know mucn about Macs but people are having problems with firmware upgrade. I know it sounds dumb using Windows to updatefor mac.

---

<div class="post-metadata">

**Author:** ![abilstein](https://sea2.discourse-cdn.com/sandisk/user_avatar/forums.sandisk.com/abilstein/32/64246_2.png) [@abilstein](https://forums.sandisk.com/u/abilstein)\
**Post date:** [December 3, 2010, 7:21am UTC](https://forums.sandisk.com/t/virtual-cd-manager-cannot-configure-drives-on-firmware-20-18/407653/3 "2010-12-03T07:21:28Z")

</div>

Thanks for the reply.

It appears that the thread you are linking to is in reference to the firmware update bricking the hard drive. This is not my problem. I was able to update the firmware successfully. Afterwards, I was unable to use the VCD Manager successfully and a message indicated that I should update my firmware (which I cannot update any further as far as I know).

My current state is no worse than before (my drive works, the VCD appears in the Device list), but I would like to be able to hide the VCD, as I should be able to according to the WD instructions.

I do have a Windows machine at work, and I could to connect my drive there and try to use the VCD Manager in Windows, but I wouldn’t think that would help the situation. If it does, I’ll report back here.
