# ScanDisk Extreme Portable SSD

**URL:** <https://forums.sandisk.com/t/scandisk-extreme-portable-ssd/245970>\
**Category:** Extreme Pro Internal SSD\
**Tags:** extreme-portable-ssd\
**Created:** [September 23, 2024, 11:50am UTC](https://forums.sandisk.com/t/scandisk-extreme-portable-ssd/245970 "2024-09-23T11:50:29Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Razor829](https://avatars.discourse-cdn.com/v4/letter/r/a9adbd/32.png) [@Razor829](https://forums.sandisk.com/u/Razor829)\
**Post date:** [September 23, 2024, 11:50am UTC](https://forums.sandisk.com/t/scandisk-extreme-portable-ssd/245970/1 "2024-09-23T11:50:29Z")

</div>

I cannot delete any files off of my SSD drive. It stays on 0% complete. Just bought it brand new out of the box

---

<div class="post-metadata">

**Author:** ![suruguri.chaithanya1](https://avatars.discourse-cdn.com/v4/letter/s/54ee81/32.png) [@suruguri.chaithanya1](https://forums.sandisk.com/u/suruguri.chaithanya1)\
**Post date:** [September 24, 2024, 12:29pm UTC](https://forums.sandisk.com/t/scandisk-extreme-portable-ssd/245970/2 "2024-09-24T12:29:02Z")

</div>

Hi @Razor829

Have you checked our knowledge base articles?  
([Get Support for Your SSDs and Flash Products | SanDisk](https://shop.sandisk.com/support))

Try this one.

- [Steps to Format a Drive for Use with Windows or macOS | SanDisk](https://support-en.sandisk.com/app/answers/detailweb/a_id/8200)

Have you opened a Support Case?  
If not, contact SanDisk Technical Support for assistance.  
([Contact Support | SanDisk](https://shop.sandisk.com/support/contact-us))

---

<div class="post-metadata">

**Author:** ![johnjacobb40](https://avatars.discourse-cdn.com/v4/letter/j/b487fb/32.png) [@johnjacobb40](https://forums.sandisk.com/u/johnjacobb40)\
**Post date:** [September 26, 2024, 9:58am UTC](https://forums.sandisk.com/t/scandisk-extreme-portable-ssd/245970/3 "2024-09-26T09:58:21Z")

</div>

Hi Razor829

1. Open Disk Management and try formatting the SSD. Keep in mind that this will erase all the data on it.

2. Open Command Prompt as an administrator and type `chkdsk X: /f` (replace `X` with the letter of your SSD) to check for errors.

3. Ensure the SSD is formatted as NTFS or exFAT, which work best with Windows.

4. Go to Device Manager, find your SSD, right-click it, and choose **Update driver**

5. Open Command Prompt as an administrator, type `diskpart`, then `list disk`, select your SSD, and type `attributes disk clear readonly` to remove any read-only settings.

If none of these steps help, the SSD might be defective, and you should reach out to the manufacturer for help or consider returning it.
