Sansa Clip+ Firmware Update 01.02.18

Ah, ok, thanks for the heads-up on the error message. Not a big deal, just annoying.

And on the update, yes, unzipping and placing in the root. But after I unplug the player, it does not turn off. It stays on and screen says “refreshing your media”. 

Again, I don’t think it’s a big deal, it seems to be working fine with the previous version, so I’m not too worried about it.  Thanks for your reply, though.

Hi guys,

I just updated my Clip+ to firmware V01.02.18A (it was 17A before the update), hoping to fix the issue I have, but it doesn’t. :cry:

I have a couple of new albums, that don’t show up as Artist / Album, just “Unknown”. All of these albums have in common, that they use ID3v 2.4 mp3-tags, my other recordings have <= ID3v. 2.3.

Is there going to be a new firmware for my device, that fixes the issue I have?

Thanks a lot

Andy

Sorry to tell you this, but unlikely to be further firmware upgrades–just been too long.

But an easy fix:  just import your problem albums into MP3Tag (Internet freeware) and change the problematic format into the non-problematic format.  Voila–in just a few key presses, it’s done!   :slight_smile:

I had the same problem of Oscaribo and MDeB: a FLAC album continued to frozen at the end of track 6… I have just downgraded to 01.02.16 and the problem has gone :dizzy_face:

I hope that Sandisk engineers are aware of the problem and will fix it as soon as possible.

Manosk

I’'ve had a similar problem for a while.  Whenever I have a large number of FLAC files on my Clip+, it will freeze/reboot randomly.

My solution was to reformat the device memory and hope that fixed it but since you had some success reducing FLAC-related freezes by downgrading your firmware, I’ll try that first.

I can always do a reformat if that doesn’t work.

After upade my SANSA clip+ to 01.02.18A my device is crushing, shutting off (battery 80%) and freezing.

How i can get the old version i bought my device with?

israel, sansa clip+ 8GB.

A repository of firmware:

http://anythingbutipod.com/forum/showthread.php?t=51524

I downloaded the “updater install” exe file, but when I double click and choose run, nothing happens.

I run a Windows 7 machijne and have administrator rights.

Why won’t it install?

-Jim D.

You don’t need the updater.  Don’t bother with it.

In the post that starts this thread, follow the Manual Install instructions, which are roughtly:  Download the latest firmware (look for an All Regions link), which is a .zip file. Unzip it. On the Sansa go to Settings/System Settings/USB Mode, write down which mode you had it in and change it to MSC.

Open Computer (otherwise known as Windows Explorer) and connect the Sansa to the computer. Drag the files you unzipped directly onto the driveletter for the Clip. Disconnect it (by taking the connector out of the Sansa first, not the computer) and it will update.Change the USB Mode back to what you had before.

The updater tries to contact Sandisk every time you boot up to see if there’s an update. All that does is slow down your startup.  If you’re really worried about missing an update, check in here every now and then–but as you can see from the initial post, there hasn’t been a firmware update since August 2012, which means it’s pretty unlikely there will be another.

1 Like

Thanks for this info!!!

After doing a  Firmware Update 01.02.18 on my Sansa Clip+ I am unable to make Playlists anymore…Whats up with THAT???..What good is it if I cant setup Playlist???  Do i need a driver for my OS???Help Please…My OS :Win7 With sp1

Also in settings >USB auto detect mode Win7 can’t recognize it…the only way it can is when it is in USB MSC…Any help would be greatly appreciated…Thx so much

Big news for all!  Pavtube studio has announced that its five main Mac products have been upgraded to  the latest version 4.8.5.1. According to the official news, these updated products can all support H.265 video codec as output, optimize coding parameters and fix some bugs. In other words, Pavtube Video Converter for MacPavtube HD Video Converter for MacPavtube MTS/M2TS Converter for MacPavtube MXF Converter for Mac and Pavtube iMixMXF have become comprehensive video converters for all Mac users!

What** ’ **s new in this upgraded version?

  1. H.265 video codec as output
  2. optimize coding parameters
  3. fix some bugs

Main features:

  1. Convert various video/audios as input and output.
  2. So many popular editing tools and media players are available.
  3. Easy operation workflow and faster conversion speed.
  4. Extra acceleration function for Mac users.
  5. Strong ability of setting and editing output videos.

Before May 7th, you can  get a discount  on Pavtube Mac products mentioned above. Why not take a close look at this  30% off  event and seize the chance to buy excellent products with such pretty attractive price?

Download Address:

Pavtube Video Converter for Mac:

http://download.pavtube.com/video-converter-mac/videoconvertermac_setup.dmg

http://www.amazon.com/Pavtube-Video-Converter-Mac-Download/dp/B00QIBK0TQ/ref=sr_1_3?ie=UTF8&qid=1430705226&sr=8-3&keywords=pavtube

Pavtube HD Video Converter for Mac:

http://download.pavtube.com/hd-video-converter-mac/hdvideoconvertermac_setup.dmg

http://www.amazon.com/Pavtube-Video-Converter-Mac-Download/dp/B00QI9GNZS/ref=sr_1_5?ie=UTF8&qid=1430705226&sr=8-5&keywords=pavtube

Pavtube MTS/M2TS Converter for Mac:

http://download.pavtube.com/mts-converter-mac/mtsconvertermac_setup.dmg

http://www.amazon.com/Pavtube-MTS-M2TS-Converter-Download/dp/B00QIE3U0Y/ref=sr_1_8?ie=UTF8&qid=1430705226&sr=8-8&keywords=pavtube

Pavtube MXF Converter for Mac:

http://download.pavtube.com/mxf-converter-mac/mxfconvertermac_setup.dmg

http://www.amazon.com/Pavtube-MXF-Converter-Mac-Download/dp/B00QID8K28/ref=sr_1_10?ie=UTF8&qid=1430705226&sr=8-10&keywords=pavtube

Pavtube iMixMXF:

http://download.pavtube.com/imixmxf-mac/imixmxf_setup.dmg

http://www.amazon.com/Pavtube-Studio-iMixMXF-Download/dp/B00QI7MY4Y/ref=sr_1_9?ie=UTF8&qid=1430705226&sr=8-9&keywords=pavtube

Around here the auto detect mode is called auto defect. a Clip+ should be set to MSC or if someone needs to use protected files, then MTP mode. If you are serious about using playlists on the Clip+, I suggest that you install the free Rockbox firmware on your player. It allows great flexibility in making playlists on the player itself, and many other great features. rockbox.org

This software is incompatible with Windows 10 :angry:

@slotmonsta wrote:

We suggest you update the firmware through the Sansa Firmware Updater. If for any reason the Sansa Firmware Updater does not work for you, feel free to continue by trying the more "computer savy" steps described below.

Sigh … :neutral_face:

@tazzzman wrote:

This software is incompatible with Windows 10 :angry:

 


@slotmonsta wrote:

We suggest you update the firmware through the Sansa Firmware Updater. If for any reason the Sansa Firmware Updater does not work for you, feel free to continue by trying the more "computer savy" steps described below.

 

Sigh … :neutral_face:

The Updater is not needed–it simply downloads the latest firmware for your player, which is readily available at the firmware sticky thread at the top of this forum.    :)    Likewise for the manual.

@miikerman wrote:


@tazzzman wrote:

This software is incompatible with Windows 10 :angry:

 


@slotmonsta wrote:

We suggest you update the firmware through the Sansa Firmware Updater. If for any reason the Sansa Firmware Updater does not work for you, feel free to continue by trying the more "computer savy" steps described below.

 

Sigh … :neutral_face:


The Updater is not needed–it simply downloads the latest firmware for your player, which is readily available at the firmware sticky thread at the top of this forum.    :)    Likewise for the manual.

And with the way the Updater works, you’re actually better off installing firmware updates the manual way. The Updater searches for updates every time you plug in your player. A waste of time and computer resources since there won’t be any more updates for this old of a model. :wink:

I just got a new (used) Clip+ 4gb. It has v 17 software on it, and it won’t permit Overdrive to transfer an audio book to it (can not create a folder).

Am trying to update firmware, but am flying blind.

downloaded the file, extracted it, got a file clppa.bin.

Tried dragging it to the Sandisk main entry on explorer. Nothing happens. Unplug it, clip goes to “music” which is empty. No messages that it is updating.

Tried dragging ot to the Sandisk “internal memory” folder. Nothing happens. Unplug it, clip goes to “music” which is empty. No messages that it is updating.

Is this a slow process?  Do I need to drag and drop the file and then walk away?  When is it time to unplug?

Are you sure you have a Clip+? There is no .17 firmware for that model. There IS a vers. 17 for the Clip Sport however. Maybe that is what you have?

If you try to install the wrong firmware, it won’t do anything (like you describe).

Does your player look like this:

                     Clip+

Or this:

     Clip Sport

Note - The Sport model has Bluetooth.

I had installed Rockbox.   
Now I wanted to go back to the original firmware, but I made the mistake of erasing all in the Sansa.  
When I download the firmware is a few mega, there is not everything.   
Where can I find the complete firmware?  
Thankyou