# Raid 1 rebuild going wrong - please help!

**URL:** <https://forums.sandisk.com/t/raid-1-rebuild-going-wrong-please-help/263486>\
**Category:** External SSD for macOS\
**Created:** [October 23, 2018, 4:01pm UTC](https://forums.sandisk.com/t/raid-1-rebuild-going-wrong-please-help/263486 "2018-10-23T16:01:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![lukeblazejewski](https://avatars.discourse-cdn.com/v4/letter/l/5daacb/32.png) [@lukeblazejewski](https://forums.sandisk.com/u/lukeblazejewski)\
**Post date:** [October 23, 2018, 4:01pm UTC](https://forums.sandisk.com/t/raid-1-rebuild-going-wrong-please-help/263486/1 "2018-10-23T16:01:01Z")

</div>

Hi everyone! Today I bought a 4tb WD Red drive to replace the failed drive in a 8tb MyBook Duo RAID drive. I was hoping I could simply rebuild it, but after 4% of rebuilding the WD Drive Utilities software now says RAID Status: Rebuild Failed, even though underneath that it says Drive 1 Status: Rebuilding. Very confused and not sure what to do?

The main LED is slowly blinking red, and the Drive 1 LED is permanently red.

 ![23](https://global.discourse-cdn.com/sandisk/original/3X/9/d/9d4afc706817d6507ac3f640db54becae05ae5df.png)

---

<div class="post-metadata">

**Author:** ![asp73](https://avatars.discourse-cdn.com/v4/letter/a/958977/32.png) [@asp73](https://forums.sandisk.com/u/asp73)\
**Post date:** [October 26, 2018, 7:44pm UTC](https://forums.sandisk.com/t/raid-1-rebuild-going-wrong-please-help/263486/2 "2018-10-26T19:44:30Z")

</div>

Hi lukeblazejewski,

As the drive 1 failed, you should take a backup of drive 2 and rebuild RAID of complete My Book Duo to initialize the device from the start.
