# ImageMate legacy drivers for W95/98/2K/XP and how to get that HW to work in Win 7/8/10...!

**URL:** <https://forums.sandisk.com/t/imagemate-legacy-drivers-for-w95-98-2k-xp-and-how-to-get-that-hw-to-work-in-win-7-8-10/15949>\
**Category:** Card Readers | Adapters | other products\
**Created:** [October 6, 2018, 8:52pm UTC](https://forums.sandisk.com/t/imagemate-legacy-drivers-for-w95-98-2k-xp-and-how-to-get-that-hw-to-work-in-win-7-8-10/15949 "2018-10-06T20:52:16Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![radcomtech](https://avatars.discourse-cdn.com/v4/letter/r/9e8a1a/32.png) [@radcomtech](https://forums.sandisk.com/u/radcomtech)\
**Post date:** [October 6, 2018, 8:52pm UTC](https://forums.sandisk.com/t/imagemate-legacy-drivers-for-w95-98-2k-xp-and-how-to-get-that-hw-to-work-in-win-7-8-10/15949/1 "2018-10-06T20:52:16Z")

</div>

I recovered a legacy /very old/&nbsp;ImageMate Sandisk Reader with USB connection

in my Lab , containing 16yr old info I needed to extract.

The old driver disk indicated late 1990’s origin.

The driver update indicated last stable version was 2002 and ended in XP support.

To recover about 2 dozen images&nbsp; on these elderly 8MB and 32MB Smart Media cards

that predate every other type of flash memory by years,

I had to

-\> load a VIRTUAL XP SP3 load into Oracle VirtualBox running under Win10/8.1/7

-\> load the USB extensions for that virtualized OS

-\> load and unzip the old SanDisk driver package (I have V 5.xx) archive into a TEMP directory (inside the virtual XP)

-\> execute “setup.exe” before plugging in the SanDisk ImageMate USB “teardrop shape” reader

-\> that utility loaded SDSTOR2K and SDSTRWDM system files (in the virtual XP)

-\> direct VirtualBox to connect SanDisk ImageMate to USB port (hey, Windows7 already ID’d the HW!)

-\> when XP prompts for DRIVER, I directed Windows XP to look in c:\windows\system or \system32

It took long XP minutes for the ImageMate to install and then another drive letter appeared!!

I then extracted the image files and data off the legacy cards for transfer out of the Virtual Box OS.

Another use for Virtualization!

Hint:

Users will NOT be able to force WIN7 and UP to accept the older SYS driver and DLL set for this very very old thing.

I have the 2002 complete Diskette content for the driver which will load into XP SP3.

I have to ZIP archive the whole set because SandDisk support will not have an archive of these driver files.

please email me if the following link is bad

[SANDISK IMAGEMATE 2002 Floppies (4Megs)](https://www.dropbox.com/s/045d9b9xmicbuh5/Sandisk.zip?dl=0 "dropbox link")

Again: these files are for Win95/98/2K and XP. You have to run a virtual XP in Win7/8+/10 to get the

hardware and software to connect

I can tell you Sandisk Support has come up with the wrong answers because most of them were infants&nbsp;

when this hardware was in wide use .
