# Driven to Tears..?

**URL:** <https://forums.sandisk.com/t/driven-to-tears/288542>\
**Category:** Portable SSD\
**Created:** [April 12, 2017, 12:42pm UTC](https://forums.sandisk.com/t/driven-to-tears/288542 "2017-04-12T12:42:08Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![DrVenture53](https://avatars.discourse-cdn.com/v4/letter/d/48db29/32.png) [@DrVenture53](https://forums.sandisk.com/u/DrVenture53)\
**Post date:** [April 12, 2017, 12:42pm UTC](https://forums.sandisk.com/t/driven-to-tears/288542/1 "2017-04-12T12:42:08Z")

</div>

Like many, my WD Elements 10B8 drive stopped showing up. Since I didn’t have much on it anyway (because I didn’t use if for very long) and the prompt said that I had to “format the disk”, that’s what I did. Oddly, a second prompt stated that the formatting “failed to complete”. I did attempt a data recover, but nothing showed up after 6+ hrs, so I stopped it. Is it safe to say that my external is a _lost cause_, even though “Disk Management” shows that it’s there and says that the device is functioning properly?

---

<div class="post-metadata">

**Author:** ![G\_Rayn](https://sea2.discourse-cdn.com/sandisk/user_avatar/forums.sandisk.com/g_rayn/32/56679_2.png) [@G\_Rayn](https://forums.sandisk.com/u/G_Rayn)\
**Post date:** [April 12, 2017, 4:45pm UTC](https://forums.sandisk.com/t/driven-to-tears/288542/2 "2017-04-12T16:45:22Z")

</div>

Hello,

You can test the drive using the Western Digital “Data Lifeguard Diagnostics” tool, this software will scan the drive to detect any bad sectors and may repair them:

[https://support.wdc.com/knowledgebase/answer.aspx?ID=940](https://support.wdc.com/knowledgebase/answer.aspx?ID=940)
