# Accessories

**URL:** <https://forums.sandisk.com/t/accessories/36720>\
**Category:** Sansa Fuze\
**Created:** [November 24, 2008, 4:51pm UTC](https://forums.sandisk.com/t/accessories/36720 "2008-11-24T16:51:02Z")\
**Posts on this page:** 8\
**Page:** 2

<div class="post-metadata">

**Author:** ![blackdog\_sansa](https://avatars.discourse-cdn.com/v4/letter/b/b9bd4f/32.png) [@blackdog\_sansa](https://forums.sandisk.com/u/blackdog_sansa)\
**Post date:** [November 26, 2008, 5:45pm UTC](https://forums.sandisk.com/t/accessories/36720/21 "2008-11-26T17:45:33Z")

</div>

Going back to the original thread content:

FM transmitter:

I a cheap one from Radio Shack.&nbsp; Belkin I think.&nbsp; Around $14 so I can’t be too upset.

It is “OK”.

Pros:&nbsp; Cheap.&nbsp; Works.&nbsp; I get mp3 to play in the car.

Cons:

FM signals always fading in and out.&nbsp; Changing the preset transmitting frequency every 10-20 miles sometimes.&nbsp; I never use it around town, only on long road trips where you are going to be sitting for hours and don’t want to lug a 5 pound case with 15 CDs.

Sound quality is actually not horrible once you get a clear station.

On this cheap ■■■■■■, there is a High and Low frequency range.&nbsp; Then there is a frequency selector that give you 3 stations to broadcast on.&nbsp; (yes, you are actually broadcasting a miniscule FM signal, whose range extends, at best, the width of your car)

You set Low or High and then select the particular frequency that you’ll be broadcasting on.&nbsp; When the conditions change, you’ll need to adjust this.&nbsp; You ALSO need to adjust your car stereo radio of course.&nbsp; They both need to be on the same frequency.&nbsp; In the changeover, there are loud buzzes and what-not.&nbsp; Sometimes you lose track of the coordination of the radio frequency and the fm transmitter frequency.&nbsp;&nbsp; This really isn’t the primary task; you’re supposed to be responsibly piloting a 2-ton hunk of metal, plastic and glass neck-to-neck with other drivers at 65 mph.&nbsp; Not elegant.

Plus, with this little device, there’s a central unit, a little smaller than a hocky puck, a curly-cord that runs to the cigarette lighter/12v DC power and the little cord that plugs into the mp3 player.&nbsp; Even though the thing MUST be plugged into the vehicle 12v power, it still needs batteries (2 AAA) in the device and the device still needs to be turned on.&nbsp; Now you have this hockey puck, and a button to push to activate it, these microscopic switches to change frequency (difficult when driving- and forget about actually being able to see this at night).&nbsp; There’s a cord to the lighter, a cord to the mp3…and it does not charge the mp3 player of course.&nbsp; Only the audio plugis plugged into the mp3 player.

And yes, you do have to crank the mp3 volume all the way.&nbsp; Most importantly, the cheap fm transmitter has a narrow frequency range and the bass is severely attenuated.&nbsp; Use your Custom EQ settings to bump the bass up or kick the bass on the car stereo way up.

It is far less than ideal.&nbsp; Ok.&nbsp; So, given all that, if you have a ten hour road trip, the $14 and hassle may be worth it.&nbsp; Otherwise, for me, not.

Many new cars are now equipped with stereos that have 3.5mm audio line input jacks.&nbsp; Finally!&nbsp; (maybe GM/Delco has 78 rpm gramophone inputs. I don’t know…but Sub, Toy and Hon are doing this now)

If I HAD to solve this issue, I’d get a new car stereo unit and go that way.&nbsp; A single CD stereo or one with radio only had to be pretty cheap (plus installation of course)

The MAXIMO transmitter got some fairly good reviews on amazon.

I remember seeing one brand for the Sansa e200 series that mounted the player on a cute stand of some sort (one goes in the cup holder!) , powered it and hooked up the audio…seemed pretty slick.&nbsp; But cost a lot more than $14.

Message Edited by blackdog-sansa on 11-26-2008 12:48 PM

---

<div class="post-metadata">

**Author:** ![jkj1962](https://avatars.discourse-cdn.com/v4/letter/j/5f8ce5/32.png) [@jkj1962](https://forums.sandisk.com/u/jkj1962)\
**Post date:** [November 26, 2008, 9:56pm UTC](https://forums.sandisk.com/t/accessories/36720/22 "2008-11-26T21:56:38Z")

</div>

> @blackdog_sansa wrote:

> I remember seeing one brand for the Sansa e200 series that mounted the player on a cute stand of some sort (one goes in the cup holder!) , powered it and hooked up the audio…seemed pretty slick.&nbsp; But cost a lot more than $14.

> &nbsp;

> Macally, for about $60:

> &nbsp;

> [http://www.macally.com/EN/Product/ArticleShow.asp?ArticleID=49](http://www.macally.com/EN/Product/ArticleShow.asp?ArticleID=49)

> &nbsp;

> It looks like it docks with the 30-pin-equipped players, and uses the 3.5mm (when did it stop being 1/8"?) jack on anything else.

---

<div class="post-metadata">

**Author:** ![cruiserdude](https://avatars.discourse-cdn.com/v4/letter/c/50afbb/32.png) [@cruiserdude](https://forums.sandisk.com/u/cruiserdude)\
**Post date:** [November 26, 2008, 11:00pm UTC](https://forums.sandisk.com/t/accessories/36720/23 "2008-11-26T23:00:28Z")

</div>

3.5mm _is_ 1/8", but we’re slowly adopting the metric system for alot of things, so that’s all that is.

---

<div class="post-metadata">

**Author:** ![jkj1962](https://avatars.discourse-cdn.com/v4/letter/j/5f8ce5/32.png) [@jkj1962](https://forums.sandisk.com/u/jkj1962)\
**Post date:** [November 27, 2008, 12:19am UTC](https://forums.sandisk.com/t/accessories/36720/24 "2008-11-27T00:19:35Z")

</div>

> @cruiserdude wrote:  
> 3.5mm _is_ 1/8", but we’re slowly adopting the metric system for alot of things, so that’s all that is.

Sorry, should have put a sarcasm tag or smiley in there.

After 35 years dealing with this stuff, it’s hard to change habits.😃

---

<div class="post-metadata">

**Author:** ![mcsansa](https://avatars.discourse-cdn.com/v4/letter/m/f475e1/32.png) [@mcsansa](https://forums.sandisk.com/u/mcsansa)\
**Post date:** [November 27, 2008, 2:19am UTC](https://forums.sandisk.com/t/accessories/36720/25 "2008-11-27T02:19:13Z")

</div>

> @hulksmashnow wrote:

> [Meritline.com](http://Meritline.com) has 8GB Kingston MicroSDHC cards for $18.99 shipped.&nbsp; My brother got me one for an early Christmas present.&nbsp; It’s cool to now have a 12GB Fuze!

> &nbsp;

> All the best.

HulkSmashNow…You are the man… Thanks for the info. I just ordered 2 of these…Even got free shipping.&nbsp;Thanks again and Happy Holidays.

---

<div class="post-metadata">

**Author:** ![mcsansa](https://avatars.discourse-cdn.com/v4/letter/m/f475e1/32.png) [@mcsansa](https://forums.sandisk.com/u/mcsansa)\
**Post date:** [November 27, 2008, 1:12pm UTC](https://forums.sandisk.com/t/accessories/36720/26 "2008-11-27T13:12:07Z")

</div>

Check out this site… [www.newegg.com](http://www.newegg.com/)

They have the 8gb Kingston for only 17.99 and they also have the 4gb Fuze for only $48.00.

Prices good today for Black Friday…

Oh BTW… Kingston not good for video…:smileyvery-happy:

McSansa

---

<div class="post-metadata">

**Author:** ![hulksmashnow](https://avatars.discourse-cdn.com/v4/letter/h/e47774/32.png) [@hulksmashnow](https://forums.sandisk.com/u/hulksmashnow)\
**Post date:** [November 27, 2008, 3:00pm UTC](https://forums.sandisk.com/t/accessories/36720/27 "2008-11-27T15:00:52Z")

</div>

> @mcsansa wrote:

> > * * *
> > 
> > @hulksmashnow wrote:
> > 
> > [Meritline.com](http://Meritline.com) has 8GB Kingston MicroSDHC cards for $18.99 shipped.&nbsp; My brother got me one for an early Christmas present.&nbsp; It’s cool to now have a 12GB Fuze!
> > 
> > &nbsp;
> > 
> > All the best.
> > 
> > * * *

> &nbsp;

> HulkSmashNow…You are the man… Thanks for the info. I just ordered 2 of these…Even got free shipping.&nbsp;Thanks again and Happy Holidays.

Appreciate the kind words.&nbsp; Enjoy those microSD cards.&nbsp; And Happy Holidays to you and yours, too!

---

<div class="post-metadata">

**Author:** ![canaws](https://avatars.discourse-cdn.com/v4/letter/c/c89c15/32.png) [@canaws](https://forums.sandisk.com/u/canaws)\
**Post date:** [November 29, 2008, 9:24pm UTC](https://forums.sandisk.com/t/accessories/36720/28 "2008-11-29T21:24:11Z")

</div>

1. Silicon Case - I bought a [plastic case from an Amazon seller](http://www.amazon.com/Transparent-Clear-Crystal-SanDisk-Sansa/dp/B001ECP666/ref=sr_1_1?ie=UTF8&s=electronics&qid=1227993193&sr=1-1). I’ve dropped my Fuze twice already with no problems. **About $9 (including shipping)**.

2. Memory Cards - Sandisk 4GB: [Walmart](http://www.walmart.com/search/search-ng.do?search_constraint=0&ic=48_0&search_query=sandisk+4gb+sdhc&Find.x=0&Find.y=0&Find=Find) ( **about $15 if shipped, $10 in-store** ) or [Amazon Sellers](http://www.amazon.com/Sandisk-Secure-Digital-Memory-SDSDB-4096/dp/B000P1O73A/ref=pd_bbs_sr_2?ie=UTF8&s=miscellaneous&qid=1227992905&sr=8-2) **About $10 (including shipping)**

3. Screen Protector/Belt clip - belt clip is included with the case I bought above (screen is covered by case)&nbsp;

4. I just bought a [Colby FM Transmitter](http://www.amazon.com/Coby-CA-745-Wireless-Transmitter-Cigarette/dp/B000OTF6G0) from Amazon, because it’s got good reviews and it’s not expensive. I haven’t used it yet, it’s still being shipped. **About $17 (before shipping)**.

[Previous page](https://forums.sandisk.com/t/accessories/36720.md?page=1)
