Sansa® Clip | Sansa® Clip+

[devcruz]

Does the Rest of World option no radio? im planning to use it while on airplane.  What i really wanted is:

1.No radio/or slot radio (if it willl also be restricted in airplanes)

2.Volume high (or just the same the one that im having today)

My current version is v01.02.15P

[Miikerman]

Some versions do, some don't.  

As best I know, what you can do is go to the SanDisk Clip forum at anythingbutipod.com and use the firmware guide there to manually change the letter in the firmware bin file name, which serves as a switch as to firmware options--radio, no radio, high volume, low volume, etc.

http://anythingbutipod.com/forum/showthread.php?t=25408

[tanya12]

Will the firmware update reset my Clip+ or will all the files remain on it?

[Tapeworm]

---

tanya12 wrote:

Will the firmware update reset my Clip+ or will all the files remain on it?

---

Only formatting will erase the user-added content; updatiing the firmware won't affect the files.

[Silvershot]

So what's the deal with mine? SHould I RMA it? Take a look at my problem and tell me that this is not a firmware-related issue.

http://forums.sandisk.com/t5/Sansa-Clip-Sansa-Clip/Sansa-Clip-doesn-t-turn-one-and-won-t-be-recognis...

[Tapeworm]

Please don't change the Subject line of an existing thread when it pertains to a particular firmware version. This could confuse many, many people for years to come!

[Silvershot]

---

Tapeworm wrote:

Please don't change the Subject line of an existing thread when it pertains to a particular firmware version. This could confuse many, many people for years to come!

---

Ok sorry about that.

[Miikerman]

---

Silvershot wrote:

Ok sorry about that.

---

Responded in the other thread--time to call in SanDisk Customer Service, me thinks . . . .

[Blip]

I have totally messed up my Sansa Clip+ while trying to install Rockbox. Is there any way to get a fresh new start with original firmware? Sansa Updater does not recognize the player anymore. I have tried to update manually, have copied clppa.bin to the root directory, but after unplugging the USB-cable nothing happens. When the cable is connected, there appears text "Bootloader USB mode". When I disconnect it, it says "file not found" and "Plug USB cable". And when I plug it, nothing happens... and so on.

[gwk1967]

Are you sure you have a Clip+? The Clip and Clip+ firmwares are not interchangeable. If you try to install the wrong one, it won't do anything (just as you say happened with yours). Try manually installing the Clip firmware.