Reply
Newbie
Posts: 3
Registered: ‎06-03-2017

How to Stop Freezing on "Boot 4.0" Logo Screen When Powering Up?

[ Edited ]

I've had my Clip+ for years now. I installed Rockbox on it right when I got it. It's worked perfectly ever since.

But a couple weeks ago something odd started happening. I have no idea why and don't remember doing anything to cause it.

When I power on now, it will often freeze on a screen with the Rockbox logo and it says "Boot 4.0" at the top. If I wait long enough on that screen, after a while it will switch to a screen that just says "Plug USB cable." If I hold down power and the center button long enough, it will turn off. Then I can press power again and usually it will launch, show "Boot 4.0" really quickly, then switch to Ver. 3.13 at the top and then work properly. (Once in a while, it will freeze on the "Boot 4.0" screen a second time and I have to do power-center button again and power up a third time to get it to work).

Luckily, this is the worst that happens. It doesn't always do the "Boot 4.0" thing. And when it does, I just have to do that power-center button thing and re-power it once or twice to get it to work. But it's kind of annoying to have to do this so often when I just want to turn the thing on and have it work right away.

Is there any way to get it to power on and work every time like it used to? I thought about reinstalling Rockbox since there must be something going on with the firmware or something. But I really would hate to lose all my settings and bookmarks or obviously any of my files on there. Is there anything I can do to fix this powering on problem without disrupting any of that stuff?

Newbie
Posts: 3
Registered: ‎06-03-2017

Re: How to Stop Freezing on "Boot 4.0" Logo Screen When Powering Up?

Does anyone have any help for this? I'd really appreciate it.

Newbie
Posts: 3
Registered: ‎06-03-2017

Re: How to Stop Freezing on "Boot 4.0" Logo Screen When Powering Up?

I seem to have fixed the problem.

I rebooted into original Sansa firmware (using Power and left buttons pressed together). I backed up everything on the Sansa first. Then I went into settings and formatted it. Then I used the Rockbox utility to reinstall from scratch. Everything worked then, though it was obviously all new settings and so on.

I also was able to get my original settings back in an interesting way. Just to see what would happen, I copied over my backed up .rockbox folder. When I did that, the errors came back. Not a surprise. Something was bad in that folder. Then I went and ran the Rockbox installer utility again. This time it went quickly and it seems like it just reinstalled whatever file needed fixing and left the rest. Now it's working just as it did before with all my settings but with the error fixed.

So if you have this problem I recommend first going in using the Sansa firmware option and backing things up. Then try just running the Rockbox utility on it and it may just fix what isn't working. If not, then do the whole process and format it, reinstall from scratch, copy over your backups and then run the Rockbox utility one more time.

Newbie
Posts: 1
Registered: ‎08-04-2017

Re: How to Stop Freezing on "Boot 4.0" Logo Screen When Powering Up?

Hello. I have the same problem, but worse... Happened 1 month ago. I had Rockbox installed over a year and everything was fine. 

Now, and suddenly, the player is completely dead. I have to plug it to a laptop and then do the power-center reset thing in order to start, BUT then just freezes to "Boot 4.0"... The laptop "sees" the device as a 30,6mb drive (4giga is the normal) but its useless. Says that needs to be formatted to work but when i try to do it "windows cannont complete the format"...

 

Any ideas? Tried every combination of the buttons. I dont care about backing up, just want my player to work. 

20170802_224154.jpg
Highlighted
SanDisk Guru
Posts: 16,049
Registered: ‎04-17-2008

Re: How to Stop Freezing on "Boot 4.0" Logo Screen When Powering Up?

It seems as though there's an issue with the Rockbox firmware. Try booting into the SanDisk firmware by holding the left (REW) button while booting up. Then you can format and/or re-install Rockbox.