Reply
Newbie
Posts: 4
Registered: ‎03-07-2016

Re: "Available Reserve Space" failure(?) on new SanDisk Ultra II 960GB

Thanks Prime_Tech for your post.

 

I can confirm that by following your advice and downloading the March 2014 Web Camps Training Kit installer from https://www.microsoft.com/en-gb/download/details.aspx?id=36393

 

then by manually selecting to install the .Net Framework version 4.5.2 components

 

My dashboard now reports that the drive is healthy.

 

It may be possible to just download the .NET Framework version 4.5.2 and install that but the Web Camp Training Kit installation did report that it has installed some IIS components too.  I think it is unlikely but perhaps the fix could be related to one of these IIS components that the Web Camps Training Kit installs.

 

I hope this helps someone.

Newbie
Posts: 2
Registered: ‎03-05-2016

Re: "Available Reserve Space" failure(?) on new SanDisk Ultra II 960GB

Today I launch Dashboard again noticing the drive health status is Normal. That's strange. I'm sure I have not installed any software since the last post except Windows Auto Update. I guess this miscalculation might be caused by underlying system service as Prime_Tech suggests to install another .NET Framework.

 

Now it's much better to see all status green on Dashboard report.

 

I'm using Windows 10 64bit, Dashboard 1.4.1. I suggest to run Windows Update to see if it fixes the problem while waiting for Sandisk working on the new version.

 

I hope this helps everyone.

Newbie
Posts: 1
Registered: ‎05-09-2017

Re: "Available Reserve Space" failure(?) on new SanDisk Ultra II 960GB

The best I could find on this is:

 

"232 Available_Reservd_Space": Reports the number of reserve blocks remaining. The normalized value begins at 100 (64h), which corresponds to 100 percent availability of the reserved space. The threshold value for this attribute is 10 percent availability

-- https://www.thomas-krenn.com/en/wiki/SMART_attributes_of_Intel_SSDs

 

QUESTION:

How does SanDisk recommend that the SMART health be checked under Linux? If `smartctl -a`, there will need to be a conversion table. Please advise.