Reply
Newbie
Posts: 1
Registered: ‎04-06-2016

Re: "Installation Failed, Please Try Again Later" on 1.4.2 install

So, I finally got mine working after numerous failed attempts. Here's exactly what I did...

 

  • Download dashboard 1.4.1 from Major geeks and install.
  • Close dashboard (from system tray too),
  • Use control panel - Programs and Features to remove version 1.4.1.
  • Install 1.4.2

No other actions between these steps (IE No need to reboot etc).

 

I can only assume that the 1.4.2 upgrade does not remove everything it should when it deinstalls 1.4.1

 

 

Newbie
Posts: 4
Registered: ‎04-06-2016

Re: "Installation Failed, Please Try Again Later" on 1.4.2 install

Thank you so much paulyates Smiley Wink,

 

This is the only method that worked for me.

 

Now, I use the latest version of Sandisk SSD Dashboard, the 1.4.2 version.

 

 

 

 

 

My computer (at home) : MB Asus Z170 Deluxe + CPU Intel i7 6700K + RAM Kingston HyperX Fury 16GB (2x8GB) DDR4 2666MHz CL15 + power Seasonic P-860 860W 80+ Platinum + GC EVGA GeForce GTX 980 Ti Classified ACX 2.0+ (06G-P4-4998-KR) + ventirad CPU Noctua NH-D15 + 2 fans case Noctua NF-A14 industrial PPC-3000 PWM to 140mm + 3 fans case Noctua NF-F12 industrial PPC-3000 PWM to 120mm + 2 bluray writer BRXL Asus BW-16D1HT + Sandisk Extreme Pro 960GB for systeme, games, and softwares + 2 HDD 4TB 7200tpm for the rest (dead stockage and backups). All that on Windows 10 Pro 64 Bit, in a Cooler Master Cosmos SE case, plugged to an Acer Predator XB240Habpr monitor
Highlighted
Newbie
Posts: 4
Registered: ‎11-27-2015

Re: "Installation Failed, Please Try Again Later" on 1.4.2 install

There is no msi file and folder is still there after failed install.

Newbie
Posts: 4
Registered: ‎04-06-2016

Re: "Installation Failed, Please Try Again Later" on 1.4.2 install

[ Edited ]

lepa71 wrote:

There is no msi file and folder is still there after failed install.



Do the same things that paulyates do, it's worked for me.

My computer (at home) : MB Asus Z170 Deluxe + CPU Intel i7 6700K + RAM Kingston HyperX Fury 16GB (2x8GB) DDR4 2666MHz CL15 + power Seasonic P-860 860W 80+ Platinum + GC EVGA GeForce GTX 980 Ti Classified ACX 2.0+ (06G-P4-4998-KR) + ventirad CPU Noctua NH-D15 + 2 fans case Noctua NF-A14 industrial PPC-3000 PWM to 140mm + 3 fans case Noctua NF-F12 industrial PPC-3000 PWM to 120mm + 2 bluray writer BRXL Asus BW-16D1HT + Sandisk Extreme Pro 960GB for systeme, games, and softwares + 2 HDD 4TB 7200tpm for the rest (dead stockage and backups). All that on Windows 10 Pro 64 Bit, in a Cooler Master Cosmos SE case, plugged to an Acer Predator XB240Habpr monitor
Newbie
Posts: 5
Registered: ‎04-04-2016

Re: SanDisk Dashboard 1.4.2 defective. " installation fail" now WORKS!!

I re downloaded 1.4.2 from http://kb.sandisk.com/app/answers/detail/a_id/15108/

 

Uninstalled 1.4.1 using win 10 control panel.

 

Ran the downloaded software BOOM! the .msi file appeared in C:\Program Files (x86)\SanDisk\SSD Dashboard and the install completed.

 

1.4.2.msi.PNG

VIP
Posts: 140
Registered: ‎01-24-2008

Re: SanDisk Dashboard 1.4.2 defective. " installation fail" now WORKS!!

Great

Newbie
Posts: 18
Registered: ‎02-26-2012

Re: SanDisk Dashboard 1.4.2 defective. " installation fail" now WORKS!!

I've tried everything and ver.1.4.2 won't install no matter what I do.

So I will stay on ver. 1.4.1 and will never buy another SanDisk product again,Since you all can't release a working ssd monitoring software.

Newbie
Posts: 1
Registered: ‎04-06-2016

Re: "Installation Failed, Please Try Again Later" on 1.4.2 install

I'm having the same issue with the update. I'm sure Sandisk has already recognized and is working on the issue, but just posting here so they awknowledge it's not just a small percentage having problems with the update.

 

Also, I wanted to point out that I reverted back to 1.4.1, so that I might do a clean uninstall in preparation for 1.4.2, but now I can't uninstall 1.4.1 -- it just gives me the option to install the update, which of course fails. I've tried uninstalling using the Control Panel, and by executing the official "uninstall" shorcut from the SSD Dashboard folder.

Newbie
Posts: 2
Registered: ‎04-05-2016

Re: "Installation Failed, Please Try Again Later" on 1.4.2 install

[ Edited ]

it works! Smiley Very Happy

windows 10 Pro 64 bit

installed back version 1.4.1 than uninstalled manualy and installed new one 1.4.2 no problems!

 

if you don't have a 1.4.1 copy just download it from

http://www.majorgeeks.com/files/details/sandisk_ssd_dashboard.html

 but select :downloads@MajorGeeks not authors site

Newbie
Posts: 9
Registered: ‎04-05-2016

Re: "Installation Failed, Please Try Again Later" on 1.4.2 install

"paulyates wrote:

So, I finally got mine working after numerous failed attempts. Here's exactly what I did...

 

  • Download dashboard 1.4.1 from Major geeks and install.
  • Close dashboard (from system tray too),
  • Use control panel - Programs and Features to remove version 1.4.1.
  • Install 1.4.2

No other actions between these steps (IE No need to reboot etc).

 

I can only assume that the 1.4.2 upgrade does not remove everything it should when it deinstalls 1.4.1"

 

 

I can't deinstall  1.4.1 - When I try to remove v1.4.1 it installs 1.4.2 with the known eror message.