04-30-2016 08:55 PM
I have a Toshiba Qosmio X505-Q830 running on Windows 7 Home Premium and I have purchased a Sandisk Ultra II SSD (480 Gb) to try and clone my HDD into. However, my laptop does not recognize the SSD when I connect it. When I connect the SSD to my computer via a USB cable, I hear the traditional Windows sound informing me something has been connected to my computer via USB. However, it does not show the SSD in the list of devices connected to the computer. I have tried everything to make it work and achieved no positive result.
Could you please let me know what I have to do in order to make sure my computer is able to read my SSD so I can start the data migration?
05-02-2016 01:57 AM
in that case where the drive is new you need to initialize and partition it within the disk managment
here are the steps for that
#Missing the keyboard? Press F1 for help#
04-01-2017 09:16 AM
Having same issue with Mac not recognizing drive.
This drive is an Extreme Pro 480 and contains QT files and was readable before
computer froze. Drive was in an external dock
and after reboot became unreadable.
Drive was NOT reading or writing during crash.
04-03-2017 03:52 AM
Did you checked your system BIOS, because most of the time SSDs will detected automatically and sometimes BIOS will show the SSD model number only.
If your SSD is not detected by the BIOS, than you may need to check that SATA port is enabled or not or may be your SSD is faulty. Also check those SATA cables and connections.
04-06-2017 01:20 AM
First check if it is showing on boot then
go to disc management and assign it a drive letter and or initialise it--will then show in my computer
that solves it.