03-28-2016 08:40 PM
I have my wireless stick working perfectly on my iPhone and iPad. But I can't seem to connect from my pc in the way suggested n the manual. When I go to www.sandisk.com/my connect. I get a webpage that suggests that it is not turned on. However I know it is . I can connect using the IP address as reported on my iPhone. But I cannot connect using the URLs.
Is there something I am doing wrong?
03-29-2016 08:23 AM
you cannot have an Internet connection on the PC and connect to the wireless stick. If you see a page telling you to turn it on and connect you have Internet connection as this is a webpage.
You will need to connect to the wireless stick network. If there is an Ethernet connection it will need to be disabled ur unplugged.
03-29-2016 08:35 AM
Sorry , I think you misunderstand what I am askingp. I just have the wireless stick turned on but not plug into the usb on anything.
I can access by typing its IP address into my browser on my pc but I cannot access it I just type the URL that is stated in the instructions.
03-29-2016 09:05 AM
again this means you have an Internet connection present on the pc. this is why the /myconnect url is resolving to the not connected page. If you can still get to it using the IP you can use that using the ULR requires that there is no Internet connection present on the PC.
03-29-2016 09:30 AM
OK I see this now makes sense - thanks
04-09-2016 12:45 AM
Thank you for the above posts. Bring clarity regarding the usage.
My Sandisk Wireless 32GB connect well with my Phone, my PC, and my TV for watching movies wirelessly. Here is the setup i currently use-
I was trying to figure out a way to resolve following issue or rather my requirement for more efficient use of My Sandisk Wireless Connect Drive.
Would extremely appreciate your valuable view on above.
Thank & Regards,
04-09-2016 11:25 PM
Alright here's is the possible solution.
Thanks & Regards,
06-14-2017 05:37 PM
The instructions posted in the previous message make NO sense to someone new to the SanDisk product line. "Connect to the SanDisk network..." With WHAT? The app or the PC? Connect to the local wireless network? With what? The PC or the App. PLEASE... SOMEONE WRITE SOMETHING with some CLARITY. Thank you!
07-31-2017 07:52 PM
To ensure that it's fully charged. A full charge can take up to 2 hours. The device cannot be connected using a USB cable. Plug your Wireless Stick into a computer USB port or a USB AC adaptor* to charge it.