Reply
Administrator
Posts: 528
Registered: ‎07-20-2007

SanDisk Clip Sport Plus Firmware 2.09 Download and Installation Instructions

Firmware is the software code that powers your Clip Sport Plus and Clip Voice. You can think of it as the operating system.  SanDisk actively and periodically updates the capabilities, functionality, and reliability of the Firmware.  For an optimal experience with your Clip Sport Plus/Voice, SanDisk recommends that you update your Firmware with each new release.  It’s fast, easy, and free!

SanDisk has released firmware version 2.09 for the SanDisk Clip Sport Plus/Voice. Download links and the release notes are available below.

SanDisk Clip Sport Plus/Voice Firmware 2.09 Download and Installation instructions

• Ensure your battery is > 50% full.
• Plug in your SanDisk Clip Sport Plus/Voice to your computer.
• Download and save the upgrade.hex file from the following link to a folder on your computer. - Click here to download

Image

• Drag the file to the root directory of your SanDisk Clip Sport Plus/Voice

Image

• Disconnect the SanDisk Clip Sport Plus/Voice and let the firmware update begin.
• Once it finishes doing its update, it will turn itself off.
• Turn the Clip Sport Plus/Voice on, Select your language and region preference
• Once it is back to the main menu, head to "Settings" >"System Settings"> "Info", and verify the "Version" is now 2.09"

 

SanDisk Clip Sport Plus/Voice Release notes

This new firmware has various enhancements and bug fixes, including key fixes listed below. Upon completion of the firmware upgrade, the device will turn off; power on the device to complete the upgrade process.  If the device does not initiate or complete, press & hold the Power switch for 15 seconds to reset the device and then press and hold power button again for 1 second to restart

New Changes since 2.02

Enhancements
Clip Sport Plus will go to sleep when bluetooth connection is lost and not reconnected

Bug Fixes
Improved Bluetooth compatibility with AVRCP devices that pause and resume
Fixed AAC playback time showing incorrect duration
Fixed playback issue with lossy M4A files

 

New changes since 1.10

 

Enhancements:

• Added Audible (.aax) support

Highlighted
SanDisk User
Posts: 66
Registered: ‎10-08-2010

Re: SanDisk Clip Sport Plus Firmware 2.09 Download and Installation Instructions

Happy to report the length of files now for my Amazon Music dispalys correctly..

SanDisk User
Posts: 25
Registered: ‎12-04-2009

Re: SanDisk Clip Sport Plus Firmware 2.09 Download and Installation Instructions

 

I noticed that with the latest firmware update to Clip Sport (version 1.38), the two annoying features that plagued Audible users of the Enhanced format that allowed for a single file (1: dropping the last seveal minutes; and 2: the increasing lag time to resume the further into a file playback was initiated) have been finally addressed.

 

Kudos to the firmware team, BTW, especially afer reading an explanation that concluded these issues were hardware design and beyond repair.

 

Can I assume that the most up-to-date firmware for the Clip Sport Plus has also incorporated this new functionality in its firmware?

SanDisk Guru
Posts: 4,116
Registered: ‎07-18-2007

Re: SanDisk Clip Sport Plus Firmware 2.09 Download and Installation Instructions

the sport plus only supports Audible Enhanced format (AAX). I have not seen any reports of similar issues the sport and jam had.  

Newbie
Posts: 2
Registered: ‎04-08-2017

Re: SanDisk Clip Sport Plus Firmware 2.09 Download and Installation Instructions

[ Edited ]

Thanks, this post solved my problem. Audible tech didn't know that that only Enhanced mode was supported.