Sansa Clip Zip Firmware 01.01.21

@curiouscat wrote:

This firmware download doesn’t work. Downloads but then it’s like there is no info in the bin file. Not transferrable! 

Did you download it from the link in the 1st post in this thread? Did you extract the .zip file first? It seems to be working OK for me.

Are you following the step-by-step instructions above for installing the firmware?  Again, step-by-step?

Since the mp3 only costs $35, it’s basically disposable and not a high ticket item. IMO.

@tapeworm wrote:


@curiouscat wrote:

This firmware download doesn’t work. Downloads but then it’s like there is no info in the bin file. Not transferrable! 


 

Did you download it from the link in the 1st post in this thread? Did you extract the .zip file first? It seems to be working OK for me.

Another thought . . . are you downloading and attempting to install the correct firmware for your player? If you try to put on one that doesn’t match it will not do anything, which sounds like what you are experiencing.

According to your posting history, you have never posted in the Clip Zip board before, or mentioned you had a Clip Zip. All of your previous posts have been regarding a Fuze model. Could this be what’s happening? The Fuze firmware is located here.

@tapeworm wrote:


@tnmats wrote:

It may not be any consolation but RDS is flaky here in the US too. 

 

Yet another reason to give Rockbox a try…


Yet another reason to call the station and complain. They’re the ones who input what gets displayed via RDS.

It only displays screwy in my Clip Zip.  I don’t see the same errors in my wife’s car which has RDS in it too.  I don’t know what the difference is between the 2 units and how they interpret the data.

@tnmats wrote:

 I don’t know what the difference is between the 2 units and how they interpret the data.

From my reading here, the SanDisk handling of the RDS feature just isn’t issue-free–it’s not (simply) a matter of the info. that the stations are putting out.

My Sansa Clip zip is out of order, it doesent start, even i have tried “reset” with pressing power switch for 30-60sec.

Also the pc doesent recognize the player, nothing happend by connecting it via USB to PC.

Now i got a new one, the strange thing there is a newer firmware installed V01.01.21P

what ist the difference between  V01.01.21A  and  V01.01.21P ?

1 Like

@patapon wrote:
 

Now i got a new one, the strange thing there is a newer firmware installed V01.01.21P

what ist the difference between  V01.01.21A  and  V01.01.21P ?

It’s not newer; it’s the same firmware. “A” stands for America. “P” stands for Pacific (as in Asia). Depending on the location or region settings you select after updating the firmware the suffix letter will be different.

I just bought the SanDisk Clip Zip and it says I have firmware version 01.01.21A. However, I tried to install the Firmware Updater on my PC and anytime I click “Run” in the downloaded file it doesn’t do anything. I’ve tried it with and without the Clip Zip plugged into my computer.

I was able to do a manual install, but I wanted the Updater so it would alert me to updates when I plug my Clip Zip into my computer.

Any suggestions?

@lotada -

You already have the latest firmware. There’s no need to manually re-install the same version unless you are experiencing some sort of problem that could be firmware-related, and the Updater won’t re-install the same version. If it detects the latest f/w version, it can (and will) do nothing.

And you don’t need the Updater. It’s very unlikely there will be any more f/w updates on a player that is already over 2 years old. The Updater slows down your system and amounts to little more than nag-ware every time you plug your player into your computer as it phones home looking for an update that will never come.

My zip has the version 01.01.21P. My player crash after finished playing special FLAC files~

But when I use 01.01.20, there is no problem~

And so, either avoid those files or use the earlier firmware . . . .

@liuchang wrote:

My zip has the version 01.01.21P. My player crash after finished playing special FLAC files~

 

But when I use 01.01.20, there is no problem~

Please defiine “special FLAC files”.

Just some FLACs~

Thank you for being so forthcoming. I’m sure you’ll get hundreds of responses guessing at what your issue might be.

I’m sorry but I donot know what the problem is on the files, they looks no difference with proper files. 

All the files can be played well on my PC and zip with 01.01.20.

I would just use 01.01.20. The freeze that 01.01.21 is supposed to fix appears to be quite rare.

I did post a report about an issue like the one described by liuchang.

Bug report with firmware 01.01.21. Device hangs up/freezes after finishing a track.

Yes, I saw that post and commented on it, since I’m experiencing the same freeze-reset issue.  It sounds as though downgrading the firmware solves the problem. 

Two questions: 

  1. How does one downgrade if one owns a new Clip Zip with the latest firmware and

  2. Do you happen to have a link to FW 01.01.20?

Pluvidagheepf wrote:

 

Two questions: 

 

  1. How does one downgrade if one owns a new Clip Zip with the latest firmware and
  1. Do you happen to have a link to FW 01.01.20?

 

  1. Manually, according to the directions in the firmware post.

  2. There’s a great tool here, called a SEARCH function. :stuck_out_tongue:

But here’s your link:

http://forums.sandisk.com/t5/Sansa-Clip-Zip/Sansa-Clip-Zip-Firmware-01-01-20/m-p/270703#M2531