Reply
Newbie
Posts: 3
Registered: ‎02-01-2017
Accepted Solution

Sandisk Cruzer Fit reading 0KB

[ Edited ]

Have been searching for an answer to this issue for days now.

 

Don't care about the data anymore, just hoping to get this drive working again.

 

I have pretty much tried everything out there to try and re-format my drive, from cmd prompts to programs.

 

Seemed like I had finally found a solution on this site https://ardamis.com/2009/07/02/usb-drive-unusable-unformattable-and-reporting-0-bytes-capacity/ but it turns out the link http://u3.sandisk.com/download/lp_installer.asp?custom=1.6.1.2&brand=PelicanBFG has been dead for some time.

 

Any help would be appreciated, thank you in advance.

ed.png
SanDisk Guru
Posts: 4,116
Registered: ‎07-18-2007

Re: Sandisk Cruzer Fit reading 0KB

in disk management do you see any info on the storage for the drive? if it says no media for example it seems the drive is dead and would need to be replaced. If you see unallocated you may be able to create a partition and format the drive. 

Highlighted
Newbie
Posts: 3
Registered: ‎02-01-2017

Re: Sandisk Cruzer Fit reading 0KB

There is nothing there, that was my first thought also, although the person on the site also claimed the same so there's that.
Newbie
Posts: 19
Registered: ‎02-06-2017

Re: Sandisk Cruzer Fit reading 0KB

Something gone wrong with the partition table , re-create the partition.


Just check in the list of paritions whether there is shownig any previous allocated space or unallocated space , may be he has unallocated the space , create the partition again of that unallocated space us minitool partition to check it system wont show it.

SanDisk Guru
Posts: 2,366
Registered: ‎07-23-2010

Re: Sandisk Cruzer Fit reading 0KB

What's on drive D: jasmine300?  Is your Cruzer Fit an old U3 drive??

Ed
Important files = Backed up files