02-21-2014 03:55 PM
Have a 480G SanDisk Extreme that has started to have some problems.
First we started noticing that it would hang.
Now our RAID array kicks the drive out of the array.
smartctl shows PASSED but something is wrong with the drive.
Here's some data from smartctl:
# smartctl --all /dev/sda smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.7.3-101.fc17.x86_64] (local build) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: SanDisk SDSSDX480GG25 Serial Number: 122458400496 LU WWN Device Id: 5 001b44 78eabe2f0 Firmware Version: R201 User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ACS-2 revision 3 Local Time is: Fri Feb 21 18:03:08 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0021) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 118 118 050 Pre-fail Always - 195123396 5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always - 0 9 Power_On_Hours 0x0032 000 000 000 Old_age Always - 9716 (221 58 0) 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 42 171 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0 174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 31 177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline - 0 181 Program_Fail_Cnt_Total 0x0032 000 000 000 Old_age Always - 0 182 Erase_Fail_Count_Total 0x0032 000 000 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 128 028 000 Old_age Always - 128 (0 28 0 28 0) 195 Hardware_ECC_Recovered 0x001c 120 120 000 Old_age Offline - 195123396 196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0 201 Soft_Read_Error_Rate 0x001c 120 120 000 Old_age Offline - 195123396 204 Soft_ECC_Correction 0x001c 120 120 000 Old_age Offline - 195123396 230 Head_Amplitude 0x0013 100 100 000 Pre-fail Always - 100 231 Temperature_Celsius 0x0013 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0000 000 000 000 Old_age Offline - 2629 234 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 3580 241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always - 3580 242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always - 28649 SMART Error Log not supported SMART Self-test Log not supported Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Read error rate looks high.
08-07-2014 08:29 PM
Go here and do what he says. I tried for days to stop OCZ Vertex3 to quit freezing and making me wait. Searched and tried so many things that didn't work. Including SSD Utilties.
Well when I changed the value for the below instructions \CurrentControlSet\Services\Pciide to 0 it fixed the Freezing and waiting for unfreeze to continue doing things it stopped all hesitatsions and Freezing. Was in HP DV6000 That I installed Windows 7 Pro onto standard IDE. When I cloned it I went through freezes that killed the time SSD Drive Enhanced..
No setting in HP's Cheap Bios to set so i skipped last direction. Thank God
You start with step 1 while you are still in windows in IDE mode.
12-25-2014 07:19 PM
Yea the older chipsets like ich8 intel seem to have this problem, it was set to hipm default but it did freeze, so that solution has worked so far on active.
If its not already in the faq it probably should be.
01-21-2017 05:19 AM - edited 01-21-2017 05:21 AM
I installed an Ultra II 960 drive in my W7-64 Dell XPS-1702 laptop system... Afterward I would get an occasional Shutdown within 10-15 min of power up... It would do this on either the embedded Intel, or NVidia display... SATA reports as SATA III Speeds.
Yesterday I received an email (I have Dashboard set to email me on updates) that there was a Firmware update X41310RL for my Ultra II Drive..... I did the update via Dashboard, and it all worked fine (Laptop SSD configured with 4 partitions).... Note here: I just recently went from 8Gb to 16Gb of ram, after I started seeing shutdowns, also, but that did not increase or decrease the frequency of the shutdowns....
It's only been 12 hours since the Udate..... I'm hoping to see no more shutdowns.......
Does anybody in the know here have information regarding Firmware Update Release Notes for Ultra II X41310RL Firmware?